Recent content by menace2sobriety

What have you got for sale? and for what price?, i currently have the charger, non modified inlet and outlet to it, and a BOV, spare unlocked ECU, tuning software for a VY with an ALDL cable to connect, I got an engineer to look at making all the brackets etc with pictures etc, but he made it...

If your just going for driving experience and not setting it up for dragging or power, just get a shift kit and tune and leave it at that

Originally my VY... HAD GAS, it was very gutless, firstly I took the tank out of the back and had a lot better acceleration due to the excessive weight loss, I then removed the gas restricter strangling the inlet air flow and that instantly transformed it into a new car, my fuel consumption...

A couple of things that I have found is that Exhaust - will give you noise and some extra power throughout ( maybe some drone around 2000rpm depending on the system ), Rockers - some mid-top end OOMPH ( the VY ECOTEC V6's aren't really happy HI revvers though ), LSD and Gears - off the line PEP...

Nope just incredibly drunk, got finger happy on the COPY / PASTE

I currently have the same sort of noise in my VY, anytime I ring it out over say 5500-6000rpm, just before the gear change, there is kind of an "almost" rattle noise, almost sounds like something metallic in the left hand exhaust bouncing around, I am currently putting in a rising rate fuel reg...

Hey what size is the pulley off the sc14 you have? What boost is it for? Are you willing to part with this pulley since you aren't going down the boosted track?

Removed the rear gearbox mount to get to the studs I snapped while fitting a new servo, removed all snapped studs, I also removed the mount itself only to find the rubber was perished and split in half, the tail end of the gearbox would have just been bouncing on it ( that may explain the...

MACE 25mm Manifold Insulator and 12mm Plenum Spacer fitted the other day, took roughly 35 minutes all up ( no dicking around ) + a bit longer to let the GOO set, no need for instructions, everything is very basic Now at idle with the bonnet open the whole plenum is cool to the touch even when...

25mm Manifold Insulator and 12mm Plenum Spacer fitted the other day, took roughly 35 minutes all up ( no dicking around ) + a bit longer to let the GOO set, no need for instructions, everything is very basic Now at idle with the bonnet open the whole plenum is cool to the touch even when the...

25mm Manifold Insulator and 12mm Plenum Spacer fitted the other day, took roughly 35 minutes all up ( no dicking around ) + a bit longer to let the GOO set, no need for instructions, everything is very basic Now at idle with the bonnet open the whole plenum is cool to the touch even when the...

Haha classic, All you need now is some pvc piping and cardboard to make a body kit and a steel bracket welded onto the drivers door to house the Swappa Crate of piss

FYI Block off where it goes back into the throttle body, you don't want that oily crap running back into your engine lowering your octane level and dirtying things up, vent it though a filter, in NZ there aren't no laws stopping us from doing so, if your in Aus, run the hose down behind the...

Pics Here https://forums.justcommodores.com.au/threads/install-catch-can-ecotec-v6.185988

Pics Here https://forums.justcommodores.com.au/threads/install-catch-can-ecotec-v6.185988