Recent content by Sstagg2005

Have a vt hsv noisy diff, and tailshaft needs replacing however cannot find an auto vt v8 tailshaft anywhere, I have a 3.07 lsd sitting here that is three bolt, I’m wondering if I can get a three bolt tailshaft as they’re easy to find, I’m assuming it would need to be one with a uni joint, or...

Replaced abs module already fixed issues I had previously tried playing around with immobliser fixed it for maybe a day and now it’s back to it I’d imagine it’s the bcm Also any help on gearbox flare what sensors affect transmission

Yeah no luck

Bit of a list but here we go Have a 99 VTII Clubsport Gen 3 ls1, Intermittently the cruise control cuts out, also randomly the ac and the window switches don’t work (great combo) until the car is turned off then they work Gearbox also seems to flare/rev up as it shifts on light throttle, have...

Looking for someone to remove afm/dod on my l76 has had ls7 lifters installed and ls3 cam, rockers and valley plate if anyone can do a flash tune or something, otherwise just remove dod/4cyl mode as cheap as possible located in Perth cheers

Just gotta wait for a steal to pop up and be quick got a wm stato for 3k just torn down the 6.0 redone the engine myself all up cost me nearly 4500

I’ve got a reservoir if interested im in Perth but can ship it

Pulled the l76 out of my wm stato to do lifters cam ect. Now it’s all sorted need opinions on reinstalling. Should I just remove the crash bar ect. Off the front so I don’t have to lift it up and in? Still have ac condenser hooked up also should engine mount bracket bolts be on engine or line...

Cheers mate first thing me mate who’s a mechanic said too. Thought it looked bit different to big end bearing lol Pictured what I think is mine and what I’m needing? Is it just the one piece I need? just looking at it seems to eliminate a lot of issues that stock one will have

L76 doing lifters cam ect maybe more now found in sump any thoughts? Dropped in during timing cover removal or something? Did buy it for fkall but not ideal no play in big end or knock before I took it out like you’d expect if it’s bearing

Lol this group is useless torn heads off myself and gonna fix but appreciate all the help and I’ll definitely update when I’m done lmao

Was throwing p0300 random/multiple miss I’m not sure if that would cause it, I’m assuming it’s tied into the fact it’s running like a pig and misfiring on 3 cylinders

Wm/Ve statesman 6.0 litre L76 Misfires on cylinders 1,4,7 have tried changing plugs leads injectors clean fuel rail ect. Pulled the valve covers didnt note any issues Done a compression test all around 150 psi give or take so I’m guessing not a pushrod or anything Also when driven it...

Good onya for updating the thread half are left unanswered.. do you know if it was an l76 or l98 engine by chance?

Bit of an old thread but did you get issues sorted and what battery did you use?