There was a limited edition picture LP, had the ...and justice for all cover on one side and demos and b-sides on the other. There was also garage days revisited and there was also creeping death/jump in the fire.
In my opinion (I've been listening to metallica for 25 yrs, and do have EVERY...
I have exactly the same problem.
Its probably the tcc (torque convertor clutch,) or the tcc solenoid
At about 80 the torqe convertor locks up to save fuel so it doesn't have to engage 4th early.
Its about 600 plus fitting and service( i recommend a service,) if its the solenoid it'll be...
Is it a big job to move the shifter?
Maybe, if its not a massive job, I could move the shifter and the handbrake.
That sounds like a plan, I like the idea of a 22 inch, you could run efilive and still be able to see it easily
There is a new product available saw it in SC I think, it is an electronic wireless, paddle shifter that sits between the boss kit and tiller.
And it works with turbo boxes and the 4l60e.
You could get the radio surround from a cloumn shifted car/ute and put it in, its something I've been...
Yeh mine cost 300, including service.
I have been led to believe that the shift harshness is caused by the .490 boost valve(its the largest possible valve you can buy for a 4l60e)
Even on minimum throttle the car smashes forward(for lack of a better term) on all changes, if I depress the...
Good idea with the stocking.
I used the how to and did some customisation.
I used the metal frame from the standard panel airfilter and the metal mesh from the ac delco unit.
I araldited the metal mesh into the frame and used three pieces of non-articulated foam from clark rubber...
Ok.
I also have a bt1.
It'll have a sump and tank guard.
The speedo needle light is placed above the speedo and on a seperate circuit for "stealth", also the speedo is in 1km increments.
It'll have an lsd, abs, srs, fe2 susp.
There are a few connectors under the dash and in the bay...