Search results

ITEM: VY - VZ Dash Plastics (half painted) $100 4 x interior door handle's $25 ea (new) Custom alloytec stainless steel intake pipe $50 Alloytec Head Gaskets Left and Right $60 (new) Center Console Aircon VEnts with hazard switch $20 Alloytec Crank angle sensor $50 (new) FREE - Pickup Only...

Hi guys, Its come time for me to trade in the old impulsive alloytec. Sadly the car and i have grown apart and the void will potentially be filled with a mitsubishi outlander. I have tried parts galore for the alloytec and the only advice i really have for you guys now is.. if you want a fast...

Currently im half way through a gearbox transplant. Old 6 speed dropping 3rd gear and crunching into 2nd occasionally. Picked up a 2nd hand one and it going in tomorrow. Had a new clutch installed september last year. Just wondering if it is safe to use brake cleaner to clean it, or should i...

Unfortunatly my gearbox is on the way out, dropping third morew then its finding it. Synchro's more then likely the issue. The gear box in question is an aisen 6 speed manual from a vz sv6. How hard is a change to auto? Gearbox and ECU? Easy to change to a v8 Gearbox? rebuild or brand new? So...

hey guys, wondering if a VE steering wheel will fit onto a VZ, need to upgrade as mine is stuffed. Need leather too

Guys, The gearbox (6 spd man) on my sv6 is on the way out, im either going to replace the box or get rid of the car.. Wondering if i can get a v8 auto to bolt on? Ultimatley i weould like to keep the manual, but the synchro's are on the way out, 2nd keeps popping out. What other options are...

As the title suggests, the drivers belt buckle, the bit that the seat belt clips into has broken and wont lock the seat belt in place. Do the earlier model commodores have the same setup? or do i need to replace with the same model. I can pick up one easily from a wreckers for a VT/VX. The...

Just wondering if there is any trick to removing a starter motor, or if it is as simple as removing the two bolts and wiggling it out. Would it be easier to remove the extractor? and go in from the top?

This isnt like anything else i have experienced. Sometimes it will start, just by luck. Key goes in, Engine gives that little whine and goes through check. Hear the fuel pump whine. Turn key to start engine. Nothing. I could do this about 25 times and on the 26th it might start, or i could do...

ITEM: 2005 2 Stroke Seadoo GTI LE RFI 3 Seater. PRICE: $8500 Neg LOCATION: QLD Ipswich YEAR: 2005 SERIES: 2 Stroke BADGE: GTI LE RFI ENGINE: 99 KW 2 Stroke Rotax Engine COLOUR: Yellow over white EXTERIOR CONDITION: Minor Hull Scratches Not seen when in water, Trailer is matte black...

ITEM: Brake Booster Master Cylinder $30 Center Console $30 Steering Wheel $15 Driver Side Outer door handles $20 Each FE2 Sway bar $50 Rear Vision Mirror $10 PWR Switch $5 Power Window Switch $5 Air con Fan $10 Trimming plastics for interior $10 each LOCATION: QLD Ipswich CONDITION: Used...

Can anyone give me info on wheel stud sizing, and how to tell what size i have. I require 5 New Wheel studs for my swiftco Jetski trailer and dont know what size to order.

After a few years the radiator cover has started to fade and deteriate. I had painted it impulse blue, untill i got it with brake fluid, from there i repainted it plain old black, $3 can from SCA. So the project i have started is a full repair and smoothing of the cover, i have started off by...

Headunit is working fine after install and finding a blown fuse, couldnt manage to find any wire on the headunit for the aerial, any suggestions?

Looking at getting one of these headunits from Topgear Audio for $178. Wondering what you guys think about them. Pioneer DEH-6350SD Car CD MP3 Player - ONLY $178

Questions have been raised about how i have my catch can plumbed. What are your thoughts. Car in question is a 2005 VZ Alloytec 190kw with 140,000 km on the clock. My setup Both 'ports' on the rocker cover's have been plumbed into a T piece then that goes into the lower port on the catch can...

Found some old photo's, Might spark someone's interest.

Was wondering if it was possible to organise the 'how to' thread into different models similiar to the my ride section

Wondering what oil you use for your 6 speed gearboxes, i was told Castrol GSL 75w 80 by a holden service department. Coulsnt find it on a shelf

Read end has started shuddering between 2.5 - 3.5 RPM in 2nd Gear only. I was thinking at first the rubber 'donuts' or 'coupling' that go between the diff and tailshaft or g/box and tail shaft. Was also thinking CV Joint? Ill take it to a suspension joint for a check tomorrow. Anyone had...

Model: 2005 VZ SV6 Colour: Impulse Blue Bodykit: SV6 Engine Type: 3.6L DOHC 190kw Alloytec Gearbox: 6 Speed Manual Diff: 2.89:1 LSD Brakes: QFM HPX VT-VZ Police Spec Performance Brake Pads Suspension: Lowered Peddars Springs; FE2 Shocks Wheels/Tyres: ROH Jet Blacks 245/35/19...

Thought i'd share my latest project with you, im starting to smooth and polish the manifold off my alloytec.. This has taken about 7 hours so far and im probably only getting to finish the smoothing and it is already looking gold. If your gonna try this yourself, make sure you have lots of...

sold! item has been sold

ITEM: I no longer need this exhaust, it is a custom 2.5" Catback with a lukey ultra-flow muffler and magnaflow resignator. LOCATION: Ipswich, QLD CONDITION: Used PRICE: Make an offer DELIVERY/PICK UP INFORMATION: PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer CONTACT...

Has anyone attempted an in house Fluid change on the above? My brake fluid is pretty shocking and needs replacement. I dare say it is as simple as drain, replace and bleed? Any suggestions?

About to replace the oils in the gearbox and diff in my VZ SV6 Manual. Just wondering what you have used.

Word on the street has it that mace has developed the tuning of the Alloytec a little further, including the gearbox. How far have you come and what is new, is it available yet?

Just curious, i have always thought that there was some minor ability to adjust the camber on the rear of the VZ Commodore, is this correct, or the only way to adjust camber is by installing a camber kit.

Any one point me in the right direction on how to adjust the handbrake, it has got to the point where it no longer engages and requires attention. Is it adjusted near the handbrake or down near the shoes?

I dropped my car off for a service today at Carline Enoggera for the basic once over, Oil Change and the rest. We are driving to townsville soon, so fresh oil wont hurt. Now i know you pay for what you get, we paid $60 per car for two minor services and a bunch of other inspections/labour free...

Just curious on a price to put ssl front and rear on a 97 vt s PAC, was quoted $550 all up. Sound right? I was shocked

Well i found a pod filter lying around the shed, i think it came off the old VR i used to have. Decided to whack it on the alloytec to see what all this induction noise is everyone talks about. Verdict, tiny bit with the engine open, at about 4500rpm, it gives a nice like suck. After a bit of...

hey guys just wondering what your experiences with Ceramic Coating are, benefits and what it does would be helpful

im off to willowbank tomorrow night, was curious what setup has worked best for you. I have a vz sv6 alloytec best time i ran was 15.539, 16" Chasers, 34 PSI 2200 RPM Stall. TC on little wheel spin I also ran a 15.573 with my 19" ROH furys, 2000rpm stall. TC OFF little wheel spin. What do...

This is definatley not a how to, its a how we did it, i gaurantee someone will say its dodge lol. End State Mission successfull, if yhou dont have a clue, read this, you will have some! Do not attempt if you are not familiar with safe working procedures and knowledge of the basic steps such...

Just finished swapping my mates diff center for an LSD (VS S2). wasnt overly hard. How hard is it to replace the Crown and Pinion Gears in a VZ SV6? Has anyone done this before, themselves?

Looking at upgrading my headlights to whiter ones, was wondering if you could all post up your experiences and prices for me to examine!? I want to do all in one Headlights Low/High Parkers, and Fogs

In regards to the Queensland Club Chapter. Can we please get Past Events, Event Photo's added and have threads moved to thier respective area's?

Thought this might go well with the performance thread.. Post a Short Video & Details about your Exhaust. Single 2.5 with Pacemaker extractors, stock cats and Baffled Muffler http://www.youtube.com/watch?v=Ypv6vmP0diI

Curious to see how your VZ/VE Alloytecs Run down the 1/4.. Use the Template Provided and Post a Timeslip.. year / make / model / Auto or Manual / Diff Ratio (x.xx:1) ET (xx.xxx) @ (xx.xxx)mph/x.xxx (60ft) power adders(nitrous/SC/Turbo), auto/manual with number of gears, diff ratio (x.xx:1)