Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Search results

  1. Sik_Cordz

    Fitting Ve hsv front seats

    hey guys anyone here fitted ve hsv seats in there vl. is it just a matter of getting the ve seat to fit the vl rails or is there more to it. just looking for anyone that has done it them self's cheers
  2. Sik_Cordz

    hidden wiring

    hey guys just want some ideas or what people have done. im doing hidden wiring on my vl and the part im not sure about it on the drivers side. what i can do with the battery loom harness and wiring. my battery is going in the boot. but not sure where the harness from the battery loom can go. any...
  3. Sik_Cordz

    [VIC] Vl MF5 Manual Gearbox & Manual Tailshaft

    ITEM: Vl MF5 Manual gearbox, shifts fine and dosnt crunch gears and vl manual tailshaft PRICE: $200 for gearbox & $150 for tailshaft LOCATION: vic bayswater 3153 DELIVERY/PICK UP INFORMATION: pick up only PAYMENT OPTIONS: COD CONTACT DETAILS: 0403947869
  4. Sik_Cordz

    Vz sv8 brake pedal abs pulsing

    hey guys ive got a 05 vz sv8 and just recently when i brake the brake pedal has what feels like abs pulsing. it only happens a few times per drive. but its weird it feels like the pedal go's lower and its pulsing. ive also got no abs light on the dash flashing any ideas
  5. Sik_Cordz

    problem with vl turbo

    hey guys i went to start my car yesterday and its not firing. it turns over but no go. checked spark witch seems a bit weak. its got a brand new msd ignition system. 6al and ss coil.check for fuel. got plenty coming out the rail. now i did a ecu code check and its pulling up error 21 witch is...
  6. Sik_Cordz

    Big eletric problem

    hey guys my car is having a serious electrically issue i have no interior light. no parkers. low beam. high beam. tail lights brake lights etc car starts and runs my volts gauge is showing 10 volts but when i turn the lights on it drops to 8 and when i put the indicator on i can hear...
  7. Sik_Cordz

    rb30 starter motor differnce

    hey guys started to wire up my car and noticed that the engine loom plug for the starter motor has three pins and the starter has two pins. the starter motor i have is a bosch unit.will i have to source another starter motor hitachi ? and being i have a mf5 box can i use a auto starter motor...
  8. Sik_Cordz

    [LS1] Extractors for VZ SV8

    hey guys just want some info on what other model commodore . extractors will fit on to my vz sv8 without modification also ive read somewhere on the net that the vy clubsport has the best overall factory extractors. anyone shed any light on this
  9. Sik_Cordz

    [VIC] 5Ltr conversion parts

    ITEM: vq 5ltr loom. has been modified to suit early commodore conversion but can be easily put back to stock $200 vq 5ltr ecu $80 vq 5ltr airbox $80 vq 5ltr charcoal canister $80 located in bayswater 0421485633 LOCATION: Victoria, SE Suburbs bayswater CONDITION: Used...
  10. Sik_Cordz

    [VIC] WTD: RB30 series 2 Engine

    ITEM: wtd rb30 series 2 engine LOCATION: VIC, south-east CONDITION: Used PRICE: Have cash waiting DELIVERY/PICK UP INFORMATION: Will pick-up PAYMENT OPTIONS: COD CONTACT DETAILS: 0421485633 OTHER INFO: needs to be series 2 and prefer something with low kms
  11. Sik_Cordz

    [VIC] 5Lt Engine (Melb)

    ITEM: Vq statesman 5ltr engine. removed 1 month ago from running car. has had mini service. new plugs, leads.oil filter. engine has done 220000kms, comes with ecu and loom. comes with. alternator.coil.starter..dizzy. no headers LOCATION: Victoria, SE Suburbs bayswater CONDITION...
  12. Sik_Cordz

    [VIC] Efi 5ltr Coversion

    ITEM: hey guys got a efi 5ltr coversion for sale engine is from a vq statesman with approx 210000kms with all bolt ons turbo 350 with 3500 converter k frame for engine tranny mount tailshaft to suit vl v8 radiator with au thermo fans vn loom and ecu all parts in good...
  13. Sik_Cordz

    [VIC] WTD:vn 5ltr transmission lines

    DESCRIPTION: Wanted to Buy ITEM: hey guys need some vn 5ltr transmission lines in good nick with no cracks or damage and only Melbourne sellers LOCATION: Melbourne CONDITION: Used DELIVERY/PICK UP INFORMATION: pick up only PAYMENT OPTIONS: cash CONTACT DETAILS...
  14. Sik_Cordz

    Turbo 350 in vl tranny mount plz help

    hey guys stuck at the moment working out what crossmember to use with my vl ive got a efi 5ltr with a turbo 350 tranny out of a wb ute. now i tried using the vn crossmember with the turbo 350 dosnt fit. then i was told if i use a trimatic crossmember it will fit . nope its a good 3inchs away...
  15. Sik_Cordz

    [VIC] Wrecking Vq Stato

    ITEM: vq statesman wrecking. engine box. kframe missing . everything else is there. lsd diff LOCATION: Vic bayswater YEAR: 1989 BADGE: Statesman ENGINE: Not for sale was a 5L TRANSMISSION: Auto is sold COLOUR: navy blue. EXTERIOR CONDITION: Good INTERIOR CONDITION...
  16. Sik_Cordz

    304 Turbo 350 to efi 5ltr

    hey guys just had a quick question im in need of a tranny for my efi 5ltr going in my vl and wanted to know what parts would i need to put a turbo 350 behind it ive got the flex plate still on the motor would this work with the tranny and i would need the turbo 350 converter and tailshaft...
  17. Sik_Cordz

    [VIC] vn vp 5ltr

    DESCRIPTION: Wanted to Buy ITEM: hey guys looking for a cheap vn vp etc 5ltr for a donor car so dont care about body condition just needs to have a good drive line please only Melbourne sellers LOCATION: Melbourne CONDITION: Used...
  18. Sik_Cordz

    Returning Battery To Engine bay

    hey guys ive been thinking of putting my battery back to the engine bay to complete the stock setup im aiming for, has anyone done this and if so how did there do it. my battery tray was cut out so could i use a universal battery tray as i think it would be very hard to get one out of another vl...
  19. Sik_Cordz

    Vl bonnet release spring

    hey guys im having trouble closing my bonnet and noticed the release spring is sitting in the middle where it should be sitting to the far left. any know what could cause this. spring stuffed ???
  20. Sik_Cordz

    Wiring Up Reverse Lights MX7 gearbox

    hey guys just trying to work out where to wire up the reverse lights. the gearbox has the sensors on it but no loom and my car is a factory manual. but i cant remember where i need to run the wires , to get the reverse lights working
  21. Sik_Cordz

    Car Runing Rough and Very Rich . Ecu Test Results

    hey guys just did a self test on the ecu and came up with the following 12=AFM 13=Coolant Temp Sensor ( just replaced it) 14=Speed Sensor 21=ignition signal 23= throttle switch 24= neutral switch 34= knock sensor ( not running one) 31 aircon ( not installed) i did a test on the afm...
  22. Sik_Cordz

    [VIC] F/S Nistune & RX7 Injectors Suit Vl Turbo

    Part: nistune ecu and rx7 440cc injectors x6 Condition: nistune board is only been installed 1 week ago and have receipt to prove and rx7 injectors are in good working order and direct fit into any rb30 manifold Description:nistune has basic vlt map installed so car can be started and...
  23. Sik_Cordz

    Clutch Problems vl turbo

    hey guys im having a lot of troubles with my gearbox. i have a very low bitting point with my clutch and i can select 1-5 but reverse crunches.ive bled the clutch 4-5 times and made sure there is no airbubbles.the clutch that came with the conversion wasnt the best but looked like it had some...
  24. Sik_Cordz

    [VIC] Vl Walkinshaw Front bar

    ITEM: Vl Walkinshaw Front bar LOCATION: Bayswater vic 3153 S.E suburbs CONDITION: New PRICE: $200 PAYMENT OPTIONS: cod.no delivery CONTACT DETAILS: 0421485633 OTHER INFO: bumper has never been fitted. it is sitting in its primer ready to be painted. in exc condition
  25. Sik_Cordz

    Thermo Fans for Vl Turbo

    hey guys can someone explain if there is any benefits from using a pair of thermo fans from the normal clutch fan and what thermos fans fit up with minimal mods; au el etc
  26. Sik_Cordz

    [VIC] Vl Parts , Calais front, walky bar. ventians , manual gear

    ITEM: Vl Calais Fibreglass non flip up front LOCATION: Bayswater, Victoria CONDITION: good nick. one eye lid has some material missing but easily fixed PRICE: $100 DELIVERY/PICK UP INFORMATION: Pick up, maybe able to post PAYMENT OPTIONS: Cash On Pickup or Bank Deposit CONTACT...
  27. Sik_Cordz

    Fuel Tank Breather Hose

    hey guys im in the process of replacing my current vl tank for a long range tank out of a vr but i need to know where i can pick up a new breather line.its the larger one that go's from the tank and through the chassis rail and connects to the filler.i tried to reuse the vl one but it was a...
  28. Sik_Cordz

    Fitting Long Range Fuel Tank

    hey guys picked up a long range tank out of a vr and it came with the straps now ive removed my old tank and noticed the lines were crispy lol now i need to know do i need to cut my filler neck of the vl tank and put it on the vr tank and anything else i should be aware off cheers
  29. Sik_Cordz

    [VIC] WTD: Long range fuel tank to suit Vl turbo

    DESCRIPTION:Wanted to Buy ITEM: Long range fuel tank to suit Vl turbo LOCATION: Melbourne S.E CONDITION: Used DELIVERY/PICK UP INFORMATION: only melbourne sellers please PAYMENT OPTIONS: Cash CONTACT DETAILS: 0421485633
  30. Sik_Cordz

    Vl Fuel issues

    hey guys having a issure with fueling my vl. its been starting really rough to the point where it wont idle and i thought id start with the fuel system as the tank has sat for 3years with very little fuel in it. ive removed the pressure line to the engine and cranked the engine and notice the...
  31. Sik_Cordz

    High Beam & indicators

    hey guys having some issues with my high beams and indicators my indicators when turned on only stay on don't flash. but when i put the hazards one there flash. thought id start with replacing the flasher can . but still same thing high beams just are not working. the low beams work but...
  32. Sik_Cordz

    [VIC] Asus PC1008P Netbook

    ITEM: Asus PC1008P Netbook Pc LOCATION: Vic Bayswater CONDITION: Used PRICE:$400ONO DELIVERY/PICK UP INFORMATION: Free Postage PAYMENT OPTIONS: Bank Transfer , Cash CONTACT DETAILS:0421485633 OTHER INFO: hey guys just putting a EOI on this netbook. its 6 months old and comes with the...
  33. Sik_Cordz

    [VIC] Xbox 360 kinect sensor & 2x Games

    ITEM:Xbox 360 kinect sensor & 2x Games LOCATION: Vic , Bayswater CONDITION: used, but as new condition. PRICE: $150 or best offer DELIVERY/PICK UP INFORMATION: Pick up or can post $10 to post PAYMENT OPTIONS: Direct Deposit, Paypal, cash on pick up CONTACT DETAILS: PM or...
  34. Sik_Cordz

    Disabling Power Steering

    hey guys just wanted to ask the question, that if could be a stupid question . never the less ill ask lol if you disable the power steering pump and disconnect the lines from the rack. would it be the same as having manual steering or damage the rack making it useless, i ask this as im...
  35. Sik_Cordz

    VT Springs Fit Vl

    hey guys helped a mate over the weekend change the front springs in his vt and i was curious if there will fit vl struts
  36. Sik_Cordz

    VX L67 Boost Gauge Install

    hey guys helping a mate installing a boost gauge in his superchargerd 6. but im unsure if i installed the line into the right line on the engine. i tee pieced into a line that go's to a actuator near the throttle body and we took the car for a drive and wasnt showing a boost reading.where is the...
  37. Sik_Cordz

    Changing Front Springs VX

    hey guys helping a mate change his front springs in his vx. need to know basic list of how to change them, is it different to changing springs in a vl.got spring compressors and tools. any help would be good
  38. Sik_Cordz

    Help With Installing Dizzy

    hey guys im just trying to install my dizzy and i thought i set it right, with rotor button aiming at no1 cylc.when i tried to start the car i was getting alot of poping and farting.ive set the engine at tdc compression. witch i was told align the cam gear at the top of the engine and pulley...
  39. Sik_Cordz

    Vl Not Pumping Fuel

    hey guys ive having a problem with my vl pumping fuel.ive checked both intank and ext pump and both work and both have power. but it seems nothing is coming from the tank. there is around 25ltrs of fuel. no the car has sat for 3years so is it possible somthing is stuffed inside the tank ???
  40. Sik_Cordz

    [VIC] WTD:Vl Front Srpings

    ITEM: Vl Front Springs. either low or superlows LOCATION: Melb CONDITION: New or Used PRICE: DELIVERY/PICK UP INFORMATION: pick up preferred PAYMENT OPTIONS: COD, CONTACT DETAILS: [email protected] OTHER INFO: PICTURES: If Possible
Top