Search results

how do you remove vl Calais arm rest plastic clips, the ones that are on the actual arm that go into the hole inside the door. (they are off the door trim, i need to get the plastic lugs off) i need to get them off with out damaging them, its got me stumped!

ITEM: WRECKING COMPLETE VL COMMODORE,GENUINE GROUP A KIT, AFTER MARKET GROUP A 15INCH WHEELS, 5SPEED MANUAL. LOCATION: NSW SYDNEY'S WEST. CONDITION: USED PRICE: PM ME OR COMMENT ON THIS POST, WITH THE PART YOU NEED AND WE CAN TALK ON A PRICE. DELIVERY/PICK UP INFORMATION:PICK UP OR...

ITEM: complete Vl HOLDEN CALAIS BERLINA INTERIOR RED MADEIRA LOCATION: nsw, Sydney's west. CONDITION: used PRICE: $500 ono DELIVERY/PICK UP INFORMATION:NSW SYDNEYS WEST. PAYMENT OPTIONS: CASH ON PICK UP. CONTACT DETAILS: PM OTHER INFO: front seat has some wear on the side...

just brought this vl, and would like to know what it really is, on the rego papers just says commodore. has power windows & cruise control and looks like series one interior with berlina door trims lol who knows how to work out what vl i have by the vin pictures, cars getting wrecked out...

datsun sunny we are restoring, my pop brought the car new in 1979, has been in the family since. we have just finished cleaning & freshening up the 1200 engine & box. have cut a fair bit of rust out of the body and had it plated. interior is off to be trimmed, and the car will be at the...

hey folks before you blast me about research of cam, i have done! i'm stuck between the crow cam 4503 & the 4761-(which is the one i'm liking) the information i have been reading is a little out dated, that's why i'm asking on current opinions. now my vl has a vn 304 in it, with fresh...

i have been a member of this forum for awhile,thought i would post my new ride on here,as i still use this site a lot, with the vl. Make/Model:nissan navara 2008 d40 st-x turbo diesel Colour:white Engine Type:2.5 4cyl turbo diesel Engine Mods:none as yet futre mods:lift kit,muddies...

evening ppl, i have brought 4 complete doors with very good window rubbers in them(the actual window frame rubbers and channels) which i intend to put them into my vl. now i have been told be very careful as soon as you attempt to take them out they crack? some one said spray wd40 on them...

i seen it,was good to see the driver get out and cheer.(even know deep down he would be extremely upset LOL) for those of you who missed it, supernats had a mini cruise similar to summernats,the officials said no long burnouts,though old mate in a new fg f6 decided to stoke em up,lost it ended...

hey fellow rev heads, as most of you know i have put a 5ltr into my vl, the 345 gears seem not to get enough out of first and second gears,as you would in a vn. what are peoples thoughts?? i really don't care about fuel economy,just performance :)

guys i just read that walkinshaw 056 was stolen today,i have asked for more details on it. info is from (1st Gen commodores) on facebook,i think the more sites its listed on the better.

have any of you fellow car nuts ever ran a speed'o cable up through the gearbox tunnel/floor i scored a cable to suit my gear, and its to small to run it the right way,i cant see why if i ran it up the tunnel behind the heater/dash to the cluster would be a problem??

hey guys have just rebuilt a vn engine and are having problems!! it has developed a miss at say 3000rpm and on idle it hunt's when the engine is warm and also will back fire when revved every now and then(sounds like its down on a cylinder or massive air leak),when its cold its fine.(it was...

hey people i owned this car for 6years and sold it about 5 years ago would really love to see how she is going, i spent so much time and money on the old girl would hope to see her still alive. was as pictured when sold and had the plates com086 spose it could be any where or dead by now...

my a'c decided to go AGAIN this year must be time for a seal, i'am booking it in tomorrow for a quote though they can't really give quotes which sucks! he said a regas will be $95 and seal god knows? any one had one done?? just don't want "ok your cars done you owe me $600"

hey guys and girls, can some one tell me where the clutch damper/spacer goes on a manual vn i have put mine on the snout of the pedal cluster it seems right(its a vn v8 and t5 manual into a vl) though it's still not giving enough clutch pedal i just want to confirm where the sucker goes...

i'm chasing a vn throttle cable for my 304 conversion into my vl. on eBay they say vr-vs cable they have in stock,and they can't tell me if it will fit a vn engine they said it may be different because vn is now old stock and can't be brought through Holden. can any one confirm if they are...

i need'ed a new battery for my vl and with doing some research found that optima are the go, been searching all day and found these guys that sell them about 50-100buks cheaper then other people and deliver them for $10 so if you need a battery check them out. Battery Mart Australia

as the title say's some low life fuc**ing dog tried stealing or getting some stuff out of my car early dis-morning around 01.50am.the inside door lock on the rear drivers side doesint work so when they smashed that window they could not get in,so they done the other one pulled the lock and BINGO...

as the title say's i have installed the eBay special aluminum radiator,i have been told you can earth them out so they don't rust how do you do this thanks.

hey ppl looking at getting a aluminum radaitor for my vn v8 engine in my vl, is there any negative or positive feedback on them???

ITEMs: rb30 engine,5speed manual box,diff, tail-shaft,computer,wiring and ecu complete conversion LOCATION: nsw, Sydney's west CONDITION: Used,all in running order. PRICE: $1200ono for complete conversion DELIVERY/PICK UP INFORMATION: Pickup only,unless you organize courier...

ITEM: vn group a body kit LOCATION: nsw, Sydney's west CONDITION: Used,will require some work and paint.(comes with 2liters of group a paint) PRICE: $600ono DELIVERY/PICK UP INFORMATION: Pickup only,unless you organize courier PAYMENT OPTIONS:cash on pick up,paypal, bank transfer CONTACT...

hey just wanted to know if any body has put a gilmer kit on there v8 engine in a vl,if so what thermos did you use. just wanting to know i'm building a 5liter for my vl and want to make sure it will fit in.

would a vn v8 diff fit under my vl with 225/50/16 tyres with lowerd springs and shocks? i have been told it fits though i only want to run these wheels and tyres.

hey can any off you confirm these pedals pictured are v8 manual pedals,v6 are slightly different i'm told and i can't see how, thanks for any help.

DESCRIPTION: Wanted to Buy ITEM: vb-vl v8 manual pedal box(cable) LOCATION: nsw, Sydney CONDITION: New or used is fine i dont mind. DELIVERY/PICK UP INFORMATION: Happy to pick up from Sydney,or will pay for postage cost. PAYMENT OPTIONS: Cash on pickup,paypal,cod, CONTACT...

hey, how do you bridge a inhibitor switch?? (reason being is i'm putting a manual box in and keeping the auto computer and wiring, was told this is fine) i have looked through the forms and could not find anything on the how to, i no its probably easy though my knowledge is not too good lol.

will a vn v8 manual ecu plug into an auto loom??? any help appreciated,cheers.

hey ppl, another silly question,are vn v8 and vl v8 auto tail shafts the same as manual.

pm,call or text me ITEM: complete vn calais v8 red LOCATION: sydney CONDITION: Used PRICE: emailme for the part you need DELIVERY/PICK UP INFORMATION: pick up or cod PAYMENT OPTIONS: paypal,cod.bank transfer CONTACT DETAILS: pm, or [email protected]

Does any one know if a vl v6 manual box will bolt up to a 5ltr in a vl(i don't care if it wont last too long) have been told yes and no,really need a correct answer before i go pulling things apart. Cheers.

DESCRIPTION: Want to Buy ITEM: complete car,or the motor,k frame,x member from vn to vs(injected v8) LOCATION: Sydney CONDITION: Reasonably good nick preferred. CONTACT DETAILS: reply to this thread, pm me or email [email protected] OTHER INFO: nothing

what do i need to put a 5 liter in?? will my manual v6 box bolt up to it with a custom bell-housing or is that a no no!!?? ecu,fuel pump,and the engine to be wired up. will the cross-member,tail shaft, be all good? really need some one who has done it any help would be apreciated,cheers.

hey guys, i have a drum brake diff under my vl now,i have just brought a vl disc brake diff of a pretty Dodge bloke, just wanted to know if any one has put disc brakes etc straight onto the drum diff do they just swap straight over? or am i better of putting in the new diff? thanks.

hey guys, as the title says "VT series 2 gear box rebuild where to go??" does any one know of good places in Sydney that are priced good and do a good job to get my transmission rebuilt.

DESCRIPTION:want to buy vl power window buttons LOCATION: nsw Sydney CONDITION: New or Used or even not working just need them for holes in the trim lol DELIVERY/PICK UP INFORMATION: Pickup,or cod i will pay all cost PAYMENT OPTIONS: Cash,cod CONTACT DETAILS: PM or this thread...

**************i now have one please remove thread****************************

if your buttons are worn out on your key head,go on ebay type in seller key buttons.he sells the buttons for $5 there easy to put in and work better then the originals!!!!!!

new to the forum i am a holden freak also, so thought i would post a picture of my cluby i also have the build of my walkinshaw in the vl thread. if any one has one of these cars and needs to know stuff i could probably help i have had it for 4 years and know just about every thing that goes...