Search results

stared and wondered was it my tierrod install thats making grinding sounds from the front after an alignment i dont want to be giggled at if i go back for a whinge....I really didnt want to make a thread either

lad changed his leads i think it was a combo of both but 8 times out of 10 its somthing easy unless you know you have cooked it.

lads l8 add but if you want to know which holes to bridge its basic count to 5 and 6 from left to right under the steering column..my vs even seems to have grey ports on terminal 5 and 6 so its very easy.The hard part is not getting the codes jumbled up as i seem to do to try and prevent this i...

a late reply but i had a similar problem with crank sometimes and not others a m8 said does my KEY return back to acc after starting i said no and it was my ignition switch ..Its not always this obviously but this was why mine would crank on mondays and not tuesdays.

got my vs ute back and some1 has punished the headlight wiring

you could but the fitting would need to be changed so an led t5 can fit cause they look like tiny skittles but clear plastic.theres a l8 reply 4 ya

i cant believe he said inside or outside ,

yes boss well be quiet then id forgotten it

the internet never ages my feind

says the man in a colt

having the same problem after doing my heads i will try above mentioned.

another good 1 to add has anyone put the rear donut bolts in the wrong direction and they have scraped the diff housing

Try a jump start and check your battery to see its over 440cca to crank a 6cyl when its cold if it starts instantly it may be you're battery.

Thx this is what i was looking for the fuse panel doesnt need to be removed as the bcm isnt bolted in.Thanks for the tip.As it started to look scary removing all in front of the bcm.also so in theorie i can change ecm and bcm and with a new ignition car should start.All keys are lost.also mines...

Nothing wrong with that post a hose was all that was needed.

ACcentstencils correct as different models have different plugs.Round and square are the difference this can be beaten by soldering a square plug on if you have 1 spare or vice versa.2 prong plug very easily soldered.

Lads that was a terrible effort of telling the lad how 2 do it.He knows he needs the box moved location of screws or techniques would of been good.Also does the bcm clip in and does it need to be pulled or slid left or right or there any tangs that have to be pressed for removal.People usually...

Lmao who crossthreads a vt tierod.when removed they will be cross threaded..

Seriously not many people rebuild we get next available diff and whack it in.we usually get a few years out of em.

A hose

After buying 2obd2 tool's for my 6 that dont work i found this

Yes dont use it.It puts sludge thru your system.Also its around 50 bucks a bottle so put that towards a repair as bandaid solutions with fluids never last or work at all.

Lads ive replaced my water pump and it still had a small leak which of course u was fixing. Now my weapon starts real quik tgen stops.plz tell me what u think i may have done.serpentine belts perfect.all installed properly im guessing ive fooked the crank angle sensor am i correct also to stop...

If im dumb enough to remove the belt without taking the pulley bolts out I just put a pair of 8mm socket or spanner east west on the pulley wheel and wrench.

Ac drip line?

OMG lads remove nothing but the air box and passengers front wheel for access after batterys disconnected put on stands.you can fit a rattle gun in up near passengers manifold whilst laying on the ground..surly a socket with extension fits.Why you would remove manifold leads steering racks has...

Trying to finish my l67 alone

Exactly the answers i needed thanks heaps lads.So do i get these reconditioned and use these valves etc.Or start again .I dont want the cost to blow out stupidly.Can i bolt another set on from a working motor.I have read all replys what would be the easiest way to get it put in my car.Im sick of...

Why would l67 heads need to be shaved if I removed or replaced them.Trying to buy some as mine has a crack.lad said they will need to be shaved.please explain as I thought it bolted on.Also can any recommend a decent head upgrade for this motor that's not worth more than my car.Any help will help.

it was.

This is what I found solved mine but it definitely is trying to tell you somthing.my well maintained 2000 vt beeped went crazy the mode light stayed flashing.I had 0 oil in my car and putting the a/c on,for longer than 20 minutes on,a hot Ozzie day I would of warped somthing.Stop have a look at...

Museum material that engine bit ive got the same problem.Ive got a loud whirring sound from the pump.could this be low fuel or is the pump knackered.got spark got 12v from the fuse block nothing is restricting starting.also there is a hectic ticking like central locking when i put reds...

Download pdf viewer mine said it was 2 big too.

Keys will dry.open them carfully on a hot day i sat em on the roof of the car for 30 minutes.started instantly.Seals will be buggered on,the key now i would get a new cover to seal them properly. sealed keys should keep splashes or a quik drop in a puddle at bay.most keys are missing buttons...

I dont think your timing chain did Nothing for the ac.The car would of ran terribly with unserviced or without replaced chains.When it was fixed you had a power gain which gave you a smooth running car even with the a/c on.♤He also said it was fixed with a 60 dollar coil pack.

Shouldn't useless info like this be on the ford site. Get an au and head on over 2 the ford site there are plenty of **** talkers like you waiting for your jibber.

Thanks for the fast reply.NFiI/No further information is a good short edit...nah i get you.remove the flipping tank and I will get to the dead pump.Im doing a challenge fixing 2 cars with only internet streams and just commies.I will post this as im sure u all GAF.I,will post if vt wagon pumps...

Sorry another silly question ..In saying sender you mean pump i guess..... so i dont remove the whole tank to replace the pump ?also does vt sedan pumps fit the ute?Thanks for the reply.