Search results

Ok I found the problem that 2 shops couldn't ! It was a simple in the end but normal diagnostics with a digital meter didn't find it. When the starter shorted out it caused the contacts in the ECCS relay to burn, these burnt contacts would supply 12Volts to the ECU but won't supply any current...

OK here is what happened. My friend has a VL sedan non turbo RB30 and I had installed a chip for him, anyway it was running great until after about a week he drove into his driveway hitting the large bump and the car died. :rip:On inspection the starter motor solenided fell apart and shorted out...

Ingham Car and Bike Xtravaganza May 25 -27 Its on again best party in town (well its only a small town). http://www.inghamcarshow.com.au/ has some pictures from last year. All details are on the site. Cheers Michael Smith :whistling And I have too work :cry:

Hi everyone it back on again the "Ingham Car and Bike Extravaganza" will be held next weekend. Its a great party. http://www.inghamcarshow.com.au/ Cheers Michael Smith P.S. Look for the Victor Bray look alike thats me:driving: I volunteer on the weekend.

What type of setup are you going for??? I have the 350Kw 15 PSI version and it shifts nice and hard without smashing if you know what I mean. I have been in some cars with tricked autos and some are undriveable. Keas boxes shift hard without a hugh shock that oscillates up the drive train. More...

Thanks ucwepn thats just what I need.. Thanks again. Michael Smith

I didn't want to disturb him on the weekend thats all. I have a great manual on my computer somewhere but I can't find it. I found the instructions Paul sent me and have adjusted the bands now. I just need to retorque the pan. Does Paul make good auto's or what!!! Cheers Michael Smith

Thanks ucwepn, I am after the adjustment proceedure for the second band and the over drive band. I also would like the torque settings for the pan bolts. I have just dropped the pan on my rebuilt trans. I also wouldn't mind a Hydralic circuit as well please if that...

Hi would anyone be able to point me to a 4N71B (VL Turbo) manual on the net please, I need to service mine and can't find the file on my computer. I need to spring clean. I know that one exists but I can't remember where I found it. Cheers Michael Smith:bang:

And mine is **** Hot too!!! :air: :air: :air: :air: :bow: The current version is a CAt09 and it works well!!! Control freak ...back in CONTROL....YEEHAAA Michael Smith

The current price for a cat09(Can Bus to IR control) from AudioTech is $176.00 including postage. http://www.audiotech.net.au/CarAudio.asp I have one comming so I thought I would post the price..I will let you know what I think after I have installed it. Cheers Michael Smith P.S. I...

It may be the cable that goes from the cd cartidge in your stereo to the control board. Cheers Michael Smith

have a look at my original post may shed some light for you there is a circuit diagram and a pinout....http://forums.justcommodores.com.au/showthread.php?t=25999 Cheers Michael Smith

Sony MEXR1($499-799) can do that all you need is a MP3 draw( $49)and it will fit in your VS too. I have one in my VX. Also the MEXR1 and read mp3's on DVD too.. :D Cheers Michael Smith

Just pullen ya leg!! I am too old to do that!!! 42 But I do love ACDC. Here is a copy of my wiring I used the plug from the old stereo and made a cable to do the job! Thanks again Michael Smith P.S. the Wife likes the stereo too, better than the kids screaming any day. :yeah:

A new plug fixed it sounds tuff too.. Can't wait to see it on the strip. The last car done 13.2 @ 102 not bad for a NA 202. I wonder what the bent 8 will do? :yeah: :driving: Michael Smith

OK I got my stereo going first time and it works great! Thanks for the help the only problem I had was the metal that held the original stereo was not level with the front facia a hammer fixed that it looks like a welding error..any way BOOOMMP ...BOOMMP keep the street awake.. I can put my...

Thanks StoneX and 12Voltking that makes my life much easier! Cheers Michael Smith

OK I have searched all the antenna questions. I have pulled my dead VX stereo apart. On the daughter board where the harness plugs into the pins are identified. including antup and antdown however on the actual wiring harness there are no pins or wires. My stereo had no adjustment controls. The...

Car Audio Transponder Where do you buy one for a VX I have a new MP3 CD player with IR remote can they work together?? Michael Smith

I had it pulled out it looks like it is going to become a new carrier for my new MP3 stereo. I checked the laser it looks clean I will check the disc drive turns then it will be all over BBQ stereo!!! They are not very complex very simple inside. :flame: Michael Smith

Bloody CD player keeps going CD error 04 every time I plug in a CD now at first it was every now and then and now it doesn't work at all. Any idea?? Stock VX Equipe Standard stereo.. geezz.. Michael Smith :ranting:

My Vx works 50m away Go figure..as measured by how far I can hit a golf ball while drunk!!! Cheers Michael Smith

You could use a port sniffer to work out whats going on. I wrote a data logger for the Wolf 3d V4 using a port sniffer and some guess work and a few lucky breaks. I am sure ther would be someone who is can program and loves Holdens out there just looking to write some flash software. It would be...

:whistling bloody different plug on the dizzy it looks like it is plugged in but it isn't....nothing a good set of side cutters can't fix . :b: Michael Smith

OK I found out....the early VN series 1 had one type of plug the later model VN,VP,VR,VS has another. The can be identified like this the old plug has 2 locating blocks on opposite sides of the connector. The late model on has 2 locating slots on the same side(firewall side of the plug) I have...

Mine was in the same place same door VX series 1 under warranty. I have had 5 electric widows go in 4 years. I have another one to do this service 100 000ks :w00t: Cheers Michael Smith

No sorry I mean on the V8 models I am wondering if the VR and VN dizzy are interchangable. I know they use the same internal parts but are the connector the same. Thanks for the quick response boona15 Cheers Michael Smith :thumbsup:

Hi are VN and VR dizzys interchangable ie are the plugs the same? I know the internals are the same but are the connectors??? Cheers Michael Smith :confused:

Hi everyone I have done efi conversions before without problems. Vk 6 EFI it HQ ute, a couple of mazda's both NA and turbo but my brother inlaw asked me to do his EFI VR 5.0L swap.. The problem is it won't fire. VR engine VN harness VN 1277808 ECU V8 Memcal(auto) the Ignition module works the...