Search results

Hi All, I've found a company that can make ADR Compliant carbon fibre bonnets - Blits Bodykits is the company (type that into google). *I'm trying to gauge peoples interest in an ADR compliant vented bonnet made out of real carbon fibre for the VT, VX & VU Commodores. The vents will help...

Hi all, I have a VT V6 Series 1 Commodore that is having an LS1 from a VX Commodore installed, I have picked up a VY lS1/T56 wiring harness (with ecu). Can this be used? If not, who makes what I need and how much does it cost. Failing that. Does anyone have a VT LS1 Manual harness for sale...

Hi all, Does anybody know of any shops in Australia that have pre-built forged or stroked LSx engines? Either short block or long block engines?? Preferably LS3 engines. Thanks.

00000000000000000000000000000000000000000

Hi all, I'm in the final stages of getting my LS transplant into my VT, but I'm wanting to convert the power steering and transmission lines (Turbo700) to braided hose. I will be going with Speedflow fittings and hoses, so 100 series fittings/hose for low pressure side and 200 series...

Hi all, I have an LS1 engine that I purchased from someone in Victoria recently, they engine was a good price, but had a few small parts missing. One of those is the Coolant bypass/crossover lines on the heads. On the earlier LS1's they connect to the front and rear of the heads and then to...

ITEM: Aeromotive 325 stealth in-tank fuel pump (aro11165) 325lph @ 40psi, direct replacement for: Commodore VE 2007-2013, EVO X 2008-2011, Monaro/GTO 2004-2006, WRX/STi 2008-2012. LOCATION: ACT CONDITION: New in box. PRICE: $199 DELIVERY/PICK UP INFORMATION: Pick up preferred, can...

Hi all, I have some part that are just sitting around collecting dust, so they need to be sold. ITEM: Greenfoam (memcal) tune. LOCATION: ACT CONDITION: Used PRICE: $40 DELIVERY/PICK UP INFORMATION: Pick up or Postage (extra cost). PAYMENT OPTIONS: Direct Deposit. CONTACT DETAILS: PM...

Hi there, First things first, I want to know the piston size and rod length of a stock LS1 from a VX? I want to forge my LS1 bottom end whilst keeping it at 346ci. Any info on what parts wold be best suited or who to buy from would be appreciated. I've bought a turbo kit for the engine, the...

ITEM: LS1 Pacemaker Extractors LOCATION: ACT CONDITION: Used. PRICE: $630 DELIVERY/PICK UP INFORMATION: Pick up preferred, can deliver in the ACT/QBN area or can post at extra cost. PAYMENT OPTIONS: Direct Deposit. CONTACT DETAILS: PM. OTHER INFO: I have some Pacemaker...

ITEM: Worked Ecotec V6 engine (from a VS commodore). LOCATION: ACT CONDITION: Used PRICE: $4500 ono. DELIVERY/PICK UP INFORMATION: Pick up preferred. PAYMENT OPTIONS: Direct Deposit, PAYPAL. CONTACT DETAILS: PM. OTHER INFO: Ecotec V6 engine (from a VS commodore). Has made 500RWHP...

Hi all, I have some part that are just sitting around collecting dust, so they need to be sold. ITEM: Greenfoam (memcal) tune. LOCATION: ACT CONDITION: Used PRICE: $50 DELIVERY/PICK UP INFORMATION: Pick up or Postage (extra cost). PAYMENT OPTIONS: Direct Deposit...

Hi all, I have a few parts that are no longer needed, they are only laying around just collecting dust. LOCATION: Canberra ACT. DELIVERY/PICK UP INFORMATION: Pick up preferred, can post at buyers expense, happy to get a quote if needed. PAYMENT OPTIONS: Direct Deposit or cash on pickup...

Hi all, I have a few parts that are no longer needed, they are only laying around just collecting dust. LOCATION: Canberra ACT. DELIVERY/PICK UP INFORMATION: Pick up preferred, can post at buyers expense, happy to get a quote if needed. PAYMENT OPTIONS: Direct Deposit or cash on...

Hey guys, I've picked up a new engine for my car recently & need a better radiator to help keep it cool. It's still an Ecotec, but will be making huge power & is capable of running up to 25-30psi boost!! I got in touch with Race Radiators today & spoke with a guy there, I told him what...

Hi there, Just cleaning out some stuff I have sitting around that came off of my VT V6. If you have any questions, just ask. ITEM: Ecotec Air conditioning compressor. LOCATION: Canberra, ACT. CONDITION: Used. PRICE: $30 DELIVERY/PICK UP INFORMATION: Pick-up preferred, but...

.......................

Hi there, Just cleaning out some stuff I have sitting around that came off of my VT V6. If you have any questions, just ask. ITEM: Ecotec Air conditioning compressor. LOCATION: Canberra, ACT. CONDITION: Used. PRICE: $80 DELIVERY/PICK UP INFORMATION: Pick-up preferred, but can arrange...

Hi there, I have recently fitted my Powerdyne supercharger to my car, but since doing so my car stalls after I rev it. I did get a throttle body and port it out a bit myself, so I'm thinking that might be the reason it's stalling, although when I take the supercharger belt off so that the...

Hi there everyone, I am in the process of fitting a Powerdyne supercharger to my ecotec, it says in the install instructions to: Disconnect PCV breather hose from throttle body. Using plug and cap provided, cap off throttle body PCV outlet. Fit new breather hose from breather outlet to...

Hi there, As the title says I need to get some piping for my intercooler, it's a CAPA 450x300x76mm intercooler with 3" inlets outlets and is needed for my powerdyne supercharger. So who can give me some prices or point me in the right direction of people in the know? Any help would be...

Hi there, What size/type of intercooler would suit a powerdyne supercharger running 9psi of boost? Do I want bar & plate or tube and fin? Tube and Fin seem to suit a street/circuit car better from what I have read. I also have: * NGK Iridium spark plugs. * Bosch motor sport racing...

Hi everyone I need a reply ASAP as to whether the VZ senator brakes will fit onto a VT V6. Thanks Glenn

Does anyone know where I can get some brackets to space a VT commodore's calipers to make them fit over 330mm rotors? There is a guy on eBay that sells them, so I know that someone makes them. I just wanted to know if there's anyone else out there that has done the upgrade and where you got...

Hi the, As the title suggests, I have recently picked up a powerdyne supercharger and want to install it myself with the help of my step dad. The thing that is stopping me is that I would like to make sure that I have all the parts first, then a rough install guide would be handy just to make...

............................

Anyone had problems with whiteline link pins?? Hi there, I was wondering if anybody has had issues with whiteline heavy duty swaybar link pins? Three months ago I snapped one pin and 20mins ago just snapped the bolt that goes through the swaybar itself, the thing is both times it was on the...

Hi there, as the title suggests what will be needed to make a decent 4L60E gearbox? So far I have a Trans-go stage 2 shift kit, and sonnax 2nd and 4th gear billet servo piston's. If anyone has a list of what they have done, that would be great. Cheers for the help.

Hi there everyone, As the title suggests I want to know is it possible to put 3.27 gears into a VT diff? Thanks for any help.

Hi there guys and gals, As the title suggests I want to get some more power out of my car in the near future. What I mean is some small stuff that will give gain's somewhere while driving. At the moment it's got: * NGK Iridium spark plugs. * Bosch motor sport racing leads. * Aunger CAI. * K&N...

Which coilover kit What would be better for a road car that sometimes sees the track, but will be mainly used for everyday driving?? Tien Super street coilovers. or DMS 40mm coilovers. I know the DMS are supposed to be a lot better quality than the Tien, but the price is changing...

Hi there I want to make a plenum spacer for my car, as I have just cut out a MDF jig for making one out of some decent wood. My first question is: Would the MDF cutout do the job with gasket goo on the outside, and some type of sealant on the inside that would be resistant to petrol and high...

Hi there guys and gals I went to get a price for my heads to get ported and polished+shaved the guy that I spoke to said that it's not worth the money and there will be not much of a gain and the other bloke there said that the manifold would not match up after shaving the heads. So my...

Hi there I recently went into JAX quickfit tyres to get a quote done on my suspension as it was making a clunking noise every now and then in the rear (when I went over bumps) they said the rear noise was to do with the diff and was nothing they could diagnose. I got them to replace some...

Hi there I was wondering if anybody has heard of a Monkey Brace before if so how good are they do they actually work and does anyone know how much they cost. Cheers Glenn.

Hi there what can be done to a VT commodore to improve handling significantly eg: coil overs, strut braces, adjustable anti roll bars, to make the thing rail corners as good if not better than the average rexy and skyline. What do people in the know with experience recommend parts and brand...

:help:Hi there I recently put on some YT 1.9/1.95 ratio RR's noticed a great improvement over stock would recommend to any one but lately I have noticed that if I put my foot flat to the floor it does not produce the same pull as putting it three quarters of the way down. Flat to the floor is...

Hey guys I just went over to my brothers house tonight. The turn off onto his street is a real tight one and the road is really thin two barley fits two cars on it anyway I had noticed this car behind me starting to get quicker around the streets almost hooning not speeding but taking corners...

Hi there I was wondering what sort of rough power figures could be possible from these mods for an auto N/A vt v6. I have this car at the moment so I want to upgrade the performance of it over time as I plan to keep this car for a very very long time. MODS: * Irridium Spark Plugs. * Bosch...

Today I got a set of Pacemaker extractors for my vt v6 commodore when I was in the shop paying for them I asked the questions do they need a gasket for the manifold I was told no and do they bolt straight up as I have not done this before and did not know I was told yes got home and realised...