Search results

could someone tell me where i would locate my engine number on my 89 series 1 vn please as i am about to prepare to sell it and i want to make shure i have all the correct details before i take it in for a safety cert regards Dan. Ps: i cannot seem to find my previous paperwork that shows this.

not that i have noticed, the other car registers the same mileage.

i'm in brissie and purchased one of fluffydogs cogs. Its cost me just under 20 dollars sent by registered. IMO i thought the cost was well worth it considering the workmanship of the solid brass item. I have installed it and it works perfectly and i'm very pleased.

its a Group A kit as on my car. I didn't know this until told the kit and paintjob was worth more than the car.

try this http://cgi.ebay.com.au/GENUINE-VN-VS-V6-ELECTRIC-FUEL-PUMP-STRAINER-SEAL_W0QQitemZ4569039336QQcategoryZ102357QQrdZ1QQcmdZViewItem http://cgi.ebay.com.au/Holden-VN-VP-VR-VS-V6-and-V8-new-fuel-pump_W0QQitemZ4571008304QQcategoryZ102357QQrdZ1QQcmdZViewItem

i'm may be the unlucky man garth as my master cylinder and booster are leaking where they join togother. I'm not quite shure as what to do though other than the fact i need to replace something. In finding a replacement master/booster from the wreckers or something i'm not really shure...

Well this is my project that i'm always referring too when i'm posting questions in the forums 89Vn (toyota Lexxon) V6 As you can see previous owners took all the toyota badges off and replaced them for whats on there now they also changed the paintjob from the std alpine white - to what to...

i had the same problem and finally found out it was the water pump, after doing all the other things first. My temp gauge while driving in normal driving conditions never moves until i go to something like hungry jacks then it will slowely move and hover around the second bar, i was told by the...

hmmm i have been looking at lowering my vn as well. i know i'll need an adjustable panyard rod, i'll also put a brace on the front as well and also will get some short travel struts for the front. the rims i want to put on the car will also require me to remove the inner plastic molding under...

while your changing the regulator , you mose well change the fuel filter at the same time. i have just changed all 3 on mine in the last week. pump,filter,regulator. wasn't too shure what was my main problem but thought stuff it do then its done until next time, i'm now looking at getting...

i have just brought one (the cheap one on ebay) for my vn and its a genuine gm part and very easy to install. I also noticed a marked difference compared to using the normal box and also using a pod style filter.

http://search.ebay.com.au/_W0QQsassZfluffydog05

did an eaby search and found this The online shop http://stores.ebay.com.au/Online-Performance-Autos_W0QQssPageNameZviQ3asibQ3astoreviewQQtZkm The Part itself http://cgi.ebay.com.au/Adjustable-Fuel-Pressure-Regulator-and-Guage-NEW_W0QQitemZ4565130612QQcategoryZ32624QQrdZ1QQcmdZViewItem

i've also clicked on the link and seen 250 price tag up from the 60 dollars quoted so could someone inform us of the correct price they have paid for this item etc. On a side note just wanted to know if you are also using the cold air induction available for around 80 bucks from ebay? and...

Hi agiain people. As it indicates above i have this problem and i was wondering what options do i have. But before we start i will eventually be also looking at upgrading my brakes to bigger and better ones. My master cylinder is leaking where it connects to my brake booster, its been...

just wondering as the title mentions if these 2 dashes are swappable because in the photos both dash's look exactly the same

Hi people need some help in purchasing the correct tools to fix my leaking tranny. Its leaking from the top 2 skinny pipes that go ointo the trans. What are the correct tools i would need to first tighten these up , (hopefully that will stop the leaking) would i also need to remove the...

i got the car on the cheap anyway and have been given motor and box so the thought was there too maybe putting in a better motor if needed. i probably would upgrade but i like the Group A Sportkit it has on it. I have just finished de-tuning the car, making it quieter. Its lost a lot of...

Thx for the replies guys. Well thats that theory down the tube i thought it might be an easy upgrade.

i have been given a 95 vs 6cyl motor and gearbox thats in good nic and only done a 100k's. I was told this engine pakage would be far better than the one i currently have in my 89 vn. This now brings me to ask all the questions involved in changing over motors and the auto. will the...

they were nice mags a pitty i found out a bit late

i am about to do the same as my vn muffler needs attention. I was also thinking of maybe using Rebback mufflers also. the only reason i was thinking of other brands was because Lukey were brought out by another company and they make the mufflers different now. To confirm this i phoned a...

i'm in brisbane on the southside.

ummm it must be a VT model then i know it a HSV cause i have driven it and seen the manual, log books and the HVS crap they gave you in the centre console etc, shows you how much i know about current holden models etc

VN - HSV VT Compatible parts Help Please Hi again people as you know i pretty new when it comes to Holdens, but i have come across a smashed up HVS VS, it the 185kw supercharged 6cy. Now considering i am now the proud owner of a second hand beat up Vn that needs some TLC i was thinking what...

Hi all. Just wanted some info on the topic above please. Is this easily done @ home, if so the tools needed to do a great job? Would it be better to get it professionally done? if so could i get a price range in what people paid for this service please.

ok this is how i did mine. so as not to get confused the cable closet to the window wipers we will call NUMBER 1 the other will be Number 2. when you open the throttle No:1 cable will be able to be easily unlatched because the cable will have some play or looseness in it. When this is done...

Hi again all, i have managed to fix my starting problems it was the starter motor that was stuffed. man what a mission to get out, the idiot that decided to put it in that location should be shot.I thought i would try and save some money and remove it go get another one myself. So i know...

yes thx for that rat in trying to help me out so quickly. i traced all the wiring and found the alarm half the wiring had been pulled out so i reconnected everything tested the alarm and it seemed to work fine,,,, noisy bloody thing. when it was activated it wouldn't let me do anything at all...

Hi all just found the forum today, and found some very interesting reading. Ok being new and not knowing where to start this might get a bit long but please don't give up on me and leave me stranded. I am in possesion of a 89 vn auto which is in need of a bit of TLC. The car had been...