308

Hey all, I’ve got a VH 6 cylinder manual steer that I’m converting to V8 Power steer, I’ve got a VS V8 k frame and need to buy a rack way what needs to be done to make it all fit

Hey fellas I need to replace the power steering pump on my 81 vc (308). Will a vn/vp pump fit? They look very similar but are about half the price. All original vc rack etc Cheers

What’s the process of getting a car registered after and engine swap? More context a vn or vp going from a factory buick option to a 304\5ltr option? Huge process or easy to do.

Calling out to the Trauma gods... Trimatic making a clunking noise when turning corners or when backing off throttle. Its so loud when turning corners that it sounds like a tailshaft hitting the tunnel. I jacked the rear up to freespin the wheels in neutral and it sounds like something is...

Hi all have an 84 VK just wondering what VN450611 motor is out of, as thats what comes up when run the plates also where to find the engine number stamping, cheers team

Im looking for a diff to put in my Vh as im building a worked 5ltr to go in. currently on has a small salisbury in it so thatll be no good. wondering what i should do for a diff, on a it of a budget, do i try and find a 28 spline borg warner or should i just try and find a 10 bolt? not too...

I want to do more work on my VQ2. I have pacemaker headers and a 3" with hi flow cat. it has been dyno tuned to 193 rwk. I have slotted rotors on the front. What should i do next? Can i get air bag suspension which keeps the car level during cornering. Who in the north or east of Adelaide...

Hi all. I'm trying to confirm what I have as specific info for my 83 VH is hard to find. It is tagged: L31 (308) M21 (4 spd man.) GU4 (3.08) Engine is VT code with B cast heads Colour is 1B 003-D which is Manet Blue. Looks very similar to Police Blue (1B 079) From the info I've read BT1 and BO1...

Hi guys, just got a motor with the engine number N968079P. Has EFI and a T700 fitted but came out of a toner. I can’t find any info on this prefix, other than a comment that the N and P related to the state (NSW) and Police, but this doesn’t sound right. Can any help shed any light on what car...

Hi

Hey guys iv got a 84 vk 308 with a bit of work done to it and im wanting to make a custom cluster for it has anyone done this on here and have any tips? Or suggestions. My odometer stopped 81k can you get electronic ones to keep track of what your doing or just forget about the ks? Cheers

Hey all, I've recently purchased a VH SLE (factory 6cyl) that has had a 308 swap done at some stage and I'm having a bit of trouble with getting the power steering hard lines installed. The previous owner left the 6cyl hard lines in there before doing the engine swap and sold as unfinished...

hey guys bought a vk sl with the injected black 202 Pulled it all out and planning on putting a black 308 in it I picked up cheap Just wondering if anybody has a quick run down on what wiring can be used/ has to go etc..

hey guys I've got a 253 stroker with a crow cam roller rockers etc... I have a 308 black motor for my vk with light scoring in bores 30thou over Im wondering what internals would be interchangeable.. if any at all Anybody have any ideas or played around with this before?

Hi all, I own a Vr 5L V8 ute which died on me whilst on my way to work. I noticed that morning when i left for work when i put my foot down it'd hesitate before revving. When the engine stalled out it would kick but not fire so i got it towed to the mechanic who said it was putting out a fault...

LOCATION: (SA – Adelaide) DELIVERY/PICK UP INFORMATION: Pick up from Adelaide or will post at buyers expense PAYMENT OPTIONS: Direct Deposit, Funds Transfer or cash on pick up CONTACT DETAILS: PM OTHER INFO: Please list as many details as possible PICTURES: can email pics if...

Hey guys so I bought an 82 VH SL as a little project car and below are some details of current and future mods, specs of car and engine. Things marked in brackets are old specs Car 1982 VH SL Holden Commodore Colour: A very lightly faded Tahitian Blue Windows: Stock for now but will...

hey guys i have a 5ltr 308 vl engine and wanted to know what are some good mods that will give the engine some extra power

LOCATION:NSW DELIVERY/PICK UP INFORMATION: Pick up preferred but i can help with delivery/ strap it onto a pallet etc. Engine is in Wagga Wagga NSW. PAYMENT OPTIONS: Cash or Bank deposit CONTACT DETAILS: Just Private message me via the forum ITEM: Black 308 removed from an 84 vk commodore...

Hi just bought a vl calais wagon 308. 450 holly pretty sure.. Edelbrock extractors.. Was a cheap buy from a mate but I want to know what I can do to make it a top contender?.. Ideas would be great cheerin!!??

Ok so after trying to order new bolts from holdens for my timing cover and water pump i found out that they can't supply a full set and what they could supply was something silly like $160 for only half the bolts. So i got one of those hotblitz sets and found out there not worth the steel there...

I have gotten my hands on a VH SLE but am not to sure what to do with it, a few people have said just to turn it into a burn out car or a bush basher. It has: 308 LSD 144,000kms Trip computer Lights still work/radio Drives No rips or wear on seats The problems that it has...

HOTVL v8 series2 calais MAD show car 1988 SERIES II VL V8 CALAIS.Factory sunroof cardinal red still factory paint.Engine 308 big solid cam, vl heads flowing 500hp, barry grant carb, performer manifold (modified),decked block,dont want to give to much info away.Engine bay has been stripped of...

Heres some pictures of my VL 308 conversion, 90% completed just needs a tune up, shifter surround made up and a Certification.

Hey i have dropped a 308 into my vl with a quadrajet and a th350 gear box and need some help on wiring it all up does anybody have a wiring diagram for this? cheers

Bit of a background story on me, im 19. i own a VT s-pack and a VK that i was given off an old lady up the road as she didn't drive it anymore. i just purchased at 308 V8 out of a VK off my girlfriends mum, also came with a turbo 350 or 400 auto ( they don't know which it is, will mention...

hello i just bought a VK 308 pretty standard besides an exhaust an aparently stage three heads an a cam ( yet to find out ) it has a in tank fuel pump an sender unit an the things completly cactus!! im havin trouble findin a replacement wrekers dont have any an im to poor to buy genuine lol i...

Got a question for you all, Planning to put a V8 into my VK and stroke it out to a 355 with a nice carby setup. My question is would I be better off using a black motor block that came stock with the VK/VL or using a later model VN+ EFI motor and putting old school heads on it to run a carby...

ITEM: IC@E IGNITION KIT Brand new never fitted to engine. Was going to go straight gas with torque power manifold but went standard efi setup on vp 5.0 instead. LOCATION: Bayswater, Victoria CONDITION: New PRICE: $800.00 neg DELIVERY/PICK UP INFORMATION: Pick up preferred, But can...

ITEM: Supra W58 5 Speed Manual conversion modified for VH. LOCATION: Victoria, Northern suburbs CONDITION: Used PRICE: 1800 ONO DELIVERY/PICK UP INFORMATION: Pick up PAYMENT OPTIONS: COD CONTACT DETAILS: Email, PM OTHER INFO: Guys up for sale is a full Supra w58 conversion kit modified...

ITEM: Hey there I have an edelbrock performer inlet manifold (dual plane) and cast heads with oversized valve springs, ported and polished 60thou. These are complete heads, spent 800 on heads alone and 230kw were made with this set up on a vk. Comes will all lines and hoses. LOCATION: VIC...

As the title suggest, I am swapping a 253 out to a 308 in an auto VH (next step is to sell the car if problems persist) I mainly need to know if the auto x-member, auto linkages and tail shaft are the same for the t400 as the trimatic. also is there somthing anyone thinks i might have...

Hey, I have a 92 VP Calais and found a nice 308 for rather cheap, would it be worth ditching the V6 and replacing it with the 308? What would be needed to complete the conversion? Cheers

hey, got a vk with a 308 carby in it. Used to run on petrol fine but i have been running it on gas for a month or so straight. And now it won't start on petrol. Even if i'm driving and i switch it over it just doesn't do anything, like it's not getting any fuel. Any ideas. I'm lost. Cheers.

hey, got a vk 308. Think it's got a m21 4 speed manual box in it. Got it cheap cos the clutch was slipping. Just wondering if i need to convert it to a hydrolic clutch or can i leave the cable clutch in and where can i find a replacement? And roughly how much will the parts cost? Cheers.

did a bit of serch but i couldnt find anything appart from that the problem could be sticky lifters...but the go is that i just got a vk 308 4 speed from a mate, and it had a few issues with dieing and not starting for a while but i got that sorted, and now i went up to get some take out in it...

Well its time for my toy car to go, change of job & selling my house has taken alot longer i had planned. VH commodore track car, $3750.00 ono, 308, 6ltr high enery circuit (with extra fitting for turbo/supercharger oil return)ported heads, new valve springs, single plane manifold, carter...

does anyone no where i can get a blue 308 to fit a 1982 4 speed VH?