boost

Hi all, Was just hoping if anybody could tell me whether or not I need a longer belt when running the mace air to air setup with a 3.4” pulley? I was told by someone locally I wouldn’t have to, but I have doubts about that. I’m assuming I’d just add the 52mm in height to the 1755mm length of...

I have a 2013 sv6 ve series 2, I believe these are the details of the engine; HOLDEN COMMODORE SV6 VE -VE 3.6L PET LFX V6 24v DOHC VVT Direct Inj {210kW}. I was wondering if anyone knew how much boost the engine can take, and a relatively safe number to run the boost at. Thanks.

Brought a l67 last night with a rwc when dricing the car after its warm, giving it some sauce and the car literally acts like its in limp mode after 3k rpm no boost nothing and the revs move up so slow!! takes 10 yrs to get to 5-6k rpm, when crusing when i flat foot it again takes ages for it...

Evening brains trust, does anyone have any info on converting to E85 retaining factory fuel lines? It's a blown L98 and I've got injectors, fuel reg, surge tank and twin 044 pumps so far. Just need hoses and adaptors. I'm aware I need Teflon hoses made up for plumbing the in tank ZL1 pump to...

I'm putting an l67 in my VT Commodore and I'll he using the stock ecotec wiring loom. How can i get the boost bypass solenoid to work because I don't want to be constantly boosting due to fuel consumption. Thanks :)

I recently for an L67 that has been fully rebuilt but if course I'm going to strip it myself to make sure it's been done properly. He said it had JE forged pistons that has 20 thou over. Won't this make too higher compression? How can I add compression back to run more boost? Thanks

started prepping my car for a bit of a turbo setup. the car goes to the odd road course race so looking for something with quick response but still decent power (7-10psi) has anyone here had experience with single turbo ecos? looking at maybe a gt3582r off a XR6 turbo? any other suggestions...

hi all not much on forums but have a quick question. I finally brought that stato I wanted but needs few things to get upto scratch. So I was thinking I like black colours and all my cars have been black so paint this vs black but then I'm getting told don't do it, don't screw with the original...

So i know theres alot of threads on this but I recently done my rear main seal and took it for a drive and its still leaking, wondering will it leak at idle? Just wondering if i can leave it running and watch for a leak to make sure its the rear main [/URL][/IMG]

For the VZ V6 guys that are sick of throttle lag, these suit the Holden VZ V6 High Feature Alloytec now. Revhigh Checkout the reviews on our facebook page!! :) https://www.facebook.com/revhigh.obsessions.5/?fref=ts

Hi everyone, Basically to start off with i live in Alice springs. so everything you buy you pay an arm and a leg for. I own a VX Series 2 Wagon with an ecotec and am wanting to turbocharge it. I dont want flame like it costs heaps and there's lots of custom fab etc etc etc. i know what im...

Has any one gone full after market? if so what one and will it work well with boost?

Hey guys, I'm thinking of slapping a turbo on the VL. Just wondering if it is a must to swap over the ECU when a turbo is added, or does the N/A ECU have the capability to slightly adjust air/fuel to accommodate boost?

Hi there everyone, I am in need of a little guidance, I have an 89 navara with a 3.8l manual out of a vn in it. I have saved up $5000 and wanted to give it a birthday of a single turbo setup running as much boost as possible! I have no idea where to start or what exactly is required to boost the...

I'm building a rear mount turbo kit for my 5 speed vt v6 that will run 5-7 psi, where can I get a tune or memcal ? In Melbourne btw! Btw I'll make a thread on how to build a stealth rear mount turbo kit( engine bay looks 100% stock ;) but yeah, want a cheap tune for basics such as l67 injectors...

I've tinted my VE sedan and have since found that the radio signal has reduced. (I know this is because the rear window demister acts as an antenna). I've purchase one of these off ebay :- Can someone in the know tell me if I can actually fit this to my VE? If so, what's the best...

was looking around ebay when i saw this BOOST ready 4.2 LITRE stroker V6 ECOTEC engines - eBay V6, Performance Parts, Car, Truck Parts, Cars, Bikes, Boats. (end time 03-Nov-10 19:03:26 AEDST) its a ecotec with- 4.2 stroker crank 14lbs boost rated I - beam rods with arp thru bolts...

Anyone fitted it before? (MACE boost upgrade kit 10psi onto L67 M90 Charger) Was it hard? and does anyone fit in the Wollongong/Sydney area? Im not too confident at giving it a crack myself! cheers guys

Hi Guys, I'm currently running a Blower with a pulley that only gives me about 2.5psi (which actually gives me only 1.5 psi Positive Boost because without the blower the Boost/Vac reading at full throttle under full load is 2 inches Hg below 0 and with the blower on, it pushes the reading up...