xforce

Hey all I've recently purchased a VF S1 SS wagon and man its so quiet. Im looking to upgrade exhaust system. Only issue is we'll have our young kids in the car so didn't want the 3" so I was looking at a 2.5 Xforce varex so I can have it closed while the kids and mrs are in it and have it fully...

Hey guys I have found an ad for a full exhaust system - hurricane extractors and cats and xforce exhaust - for a vz ute, I was wondering if it would fit onto my wagon?

Hey everyone, I've just bought myself a 2017 v6 calais v. Would've loved to go for the 6.2 to match dad's redline but unfortunately I'm on my p's for another 3/4 years. I want to replace the exhaust on the calais, but I don't know what to change it to. I want a little bit of a note and a little...

Hi All, Sorry if this seems like an obvious question to some. I’ve recently installed an xforce exhaust to my Ve V6 Sidi and have just ordered the peacemaker headers ph5080sidi. Just wondering what high flow cats will bolt on to that and the exhaust without requiring any welding? Cheers.

So, about 16,000 klms after install of a full Xforce system with varex mufflers, I start hearing a rattle in the right hand muffler and find a big chunk of cat flapping around, and the left hand side valve completely stuck shut. Pretty pissed about this crap, warranty claim PITA paperwork still...

Hey guys, I fairly recently bought a VE SSV ute and would like to tweak my exhuast, when I purchased the car it came with a cat-back 3" xforce exhuast system but had muffler eliminator pipes (Ugly 3" mild steel single pipes), I don't mind the sound, but I am looking at getting extractors in the...

Hey guys I just purchased some headers (1 3/4) for my VE 6.0, which should bolt directly on to my 2.5" xforce catback system. Was wondering if anyone knew of a decent workshop/mechanic who installs aftermarket parts for a reasonable price and quality. Located in Western Sydney, cheers.

Hey Guys, this is my first post!! I have a 2010 VE SS manual and so far I have got a 2.5" XForce Catback and a VCM OTR. Its been dyno tuned and is currently pushing 240kw to the wheels. I am looking at getting Headers next to try and get close to 260kw to the wheels but am not sure what will...

hi, I have found a secondhand xforce exhuast off a ls2 gts. I just wanna know if it would fit my ssv wagon?

Hi everyone, Trying to decide what exhaust to go with for a 2008 VE SSV. My first preference would be a full engine back system with headers, high flow cats and cat back, however my main concern is whether this will cause fault codes to appear. I've tried asking several exhaust shops and I...

Alright I need some help, I've got a Holden Vz Sv6 2004 it's got a stock exauhst on it at the moment and I want a change. I'm about to get my P's just a under a month. Is it worth getting the full system done and worrying about the cops up my ass or just the muffler. I want all your opinions to...

Hey, I have the vf sv6 and I have already got a xforce 61mm catback exhaust installed onto it but want it to have a louder sound. I'm confused with the bracket sizes because my exhaust isn't 2.5" Will this exhaust Commodore VE VF V6 V8 Sports Rear Mufflers Suit UTE | eBay Just bolt straight...

Hey guys, this is my first post here. I have recently picked up a MY15 SV6 VF Ute in Heroin White and I am looking at doing some little mods to it. I don't want to spend a huge amount of money on it because at the end of the day its still a v6. I am looking at getting an exhaust for it but I...

Was just wondering if anyone has done any mods to their VF SV6 as yet? I picked up my heron white manual SV6 last week and am now looking into exhaust/otr/tune for a bit more power, throttle response and better tone. any recommendations? Also with the Mylink system how hard is it to...

Name: Aaron Model: 2010 VE Series 2 SS wagon Colour: Black Bodykit: Standard SS Engine Type: 6.0L V8 L77 Engine Mods: Milled & Ported heads, VCM 11 Camshaft, VCM Otr CAI, VCM Oil cooler, Mafless 98ron/E85 tune Power: 330rwkw 673nm E85, 320rwkw 661nm 98 Exhaust: Xforce Extractors, Full 3" Xforce...

ITEM: 3" Xforce mild or SS cat back exhaust for a VE SS Ute (Preferably mild as I am on a budget) CONDITION: Used but good condition LOCATION: Central Coast PAYMENT: Cash on pickup Willing to travel to Sydney/Newcastle to pickup if quality item is guaranteed Thank you in advance!

Okay so I'm wanting to lower my SSV on sssl's all round and then going for a 3" xforce exhaust but not sure if my car will still be legal height in Qld. I was told sssl's have me 20-30mm above legal height but nothing to tell me if xforce hangs lower than stock.

Hey I'm looking into getting a 3.0" x force varex catback system, for my 2010 VE SV6 series 1 sedan, 6 spd manual, for the simple fact that you can adjust it. Would it pass a sound test due to these "adjustable features"? And if anyone has one can they tell me what the in car sound is like...

Hey guys just recently bought my first car and am currently working on making it a nice tidy daily driver. Model: 1998 Vt Executive Colour: White Bodykit: Wing fitted, Bodykit Stock Engine: 3.8L Ecotec V6 Engine Mods: Swaybar Exhaust: Twin 2.5" XFORCE Exhaust Gearbox: Auto Brakes: Standard...

I thought I might create this thread because I for one know how hard it is to get the Alloytec sounding good whilst making modifications to the exhaust. This is where us Alloytec owners can gather together and post up a clip of our Alloytec's exhaust and a short brief engine modification list...

I went to my local exhaust shop today and the guy told me tht i would get a nice deep rumble sound on my ve ute sv6 if i just put mufflers in with ss tips. Any comments on what this wud sound like pls let me know.