VN Cruise

[Spinksy]

Hi Guys,

I have just installed cruise control from a VP into my VN. I Have put in the electronic motor, brake switches and button cluster in the dash and its not working. From what I have read it seems I may need to change the wiring, or have I missed a part?

When I press the on/off button no light comes on and there is no power to the brake switch wires?

Can anyone Help? Thanks.

 

[markovr]

power comes from fuse 11 in the form of a pink wire that goes to F terminal of the cruise module and also to the on/off switch on the switchblock.If the cruise on indication light is not coming on the switchblock and the lighting on the switchblock for all the switches is ok the 12v for the cruise itself is missing.
Have you installed this pink wire into the bottom of fuse 11 or if you have power mirrors you just tee off that pink wire from the bottom of fuse 11 and put the wedge in ?

 

[markovr]

heres the circuit

 

[Spinksy]

Unreal Thanks for that.

There area few other wires, (yellow etc), do they stay in the same spot?

 

[markovr]

they stay where they are but here is what they are for