Recent content by vr st8to

Hi i have a VT MASTER CYLINDER in a hill climb car and want to know which out let i use for the front & which one for the rear. It has 3 out lets 1 is blocked off ( closest to fire wall ). 1 ( at front of master looking at it from front of car ) this 1 takes a larger fitting then the other 2...

It has spark but it seems very weak .

I replaced 1 @ a time and still had the same thing . Turns over fine but wont start . I made sure that N#1 was on TDC Before i placed the dizzy back in & the marks line up . The spark dose seem a bit on the weak side . I have a gp 125 2 stroke & the spark on that is a lot stronger . So to get a...

Help at Witts end . My vr v8 starto cranks but wont start . I have tried start ya bastard no luck . replaced the ignition module with a working second hand unit . replaced the hall efect sensor in the dizzy . replaced the coil.There seems to be an injector pulse . Fuel seems to be at the fuel...

Problem # 1 after upgrading the break system on my vr stato to vt discs and calipers replaced the master and booster to vt as well the abs isn't working . The abs light is on all the time . Do u need to re set the computer after u have had the master and booster and abs module & lines apart...

hi need to rebuild my vu ute 6 speed manual gen 3 . I was thinking of stroking it . what sizes can I get ( what brands are best . im looking for sumthing that's fun and reliable with sum xtra mumbo can any one help with where I should start looking.

got it going a bloody intermitent hazard switch.. grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr. thanks for all your help guys

ok thanks guys this gives me some more areas to hit. i cant see where the left over earth strap belongs ( i have the 2 on the inner gaurd to the bonnet). the blinker stalk is the original one. ive cleaned all the earth points in ther loom checked all fuses. is it possible to get power to the...

im pretty sure i havnt as the air con is working. i was heading down the road of a bad earth as everything has been painted.

the hazzards dont work either but did work before the car was painted. there seems to be no power to the blinker relay. have checked this with a test light.

Hi , Ive just finished a ground up rebuild of my vr st8to and i cant get the blin kers to work. the engine bay was also painted. all other lights work . i dont have the centre console in it yet. i have taken all the earth wires off the main harness and cleaned them as well as the bolt in the...

yeah all seems ok. it appears that i dont have power to the computer

i have a number of a guy that rebuilds them for heaps less than that. if u want it call me 0418690968

hi ive rebuilt my 304 in a vr stato plenty of spark but no pulse to the injectors. can any one help me.

hi i have painted my engine bay and rebuilt my motor. the motor was out of the car for approx 6 months. i decided to rebuild the motor after it was atempted to be stolen. the problem is i cant gey a pulse to the injectors. there is plenty of spark. the car has only got the engine and dash in...