loom

Where do these wires go in the video?? anyone know? There is a set of 6 wires coming out of the drivers side rear (rear) quarter behind the diff. They are connected to nothing and were just looped around and taped up. Do i need them for the trailer lights to work? I want to be able to tow...

G’day gents! I’ve recently purchased a wrecked V8 statesman (97) and am wanting to do a motor transplant into my V6 ute (98) Was wondering if I’ll be able to use the loom and ecu out of the statesman as the ute is obviously a lot more basic (no power windows, rear windows etc) Any advice would...

Hi all, looking at making a stand alone loom, and just want to know what all these wires do individually. Anyone got a pinout or a diagram to suit this vy plug please Cheers

I'm wondering if anyone with a VE series 1 ss ute can send me a part number from their dash wiring loom bought a car and some dick head has used a loom from a sedan in my ute so my ecm and bcm are going haywire and I can't find info of if the loom I've found is correct

Hey guys so I just changed my thermostat and that’s something I never want to do again, I’ve just reassembled everything and tried to turn the engine over and it won’t go, I forgot to plug in a single cable but I can’t exactly work out where it’s meant to go? I can’t see any plugs near or around it

Hey guys, First time I’m posting. I’m doing a few bits n’ pieces to the Ute and I’ve unplugged a bunch of things and forgotten what’s what. On the passenger side, there is a blue, orange, yellow and purple. I think one is the coolant temp sensor, the alternator and one is the maf sensor I...

Hey everyone, so I blew my motor in my vx bout a month ago and brought a motor and box out of a Vy with the loom, I was wondering if anyone know if it's straight plug and play or if there's any differences between the 2 , cheers

I have been trying to find any information regarding an sidi conversion into a vz manual ute. yes i have searched the fourms and all i can find is people saying just v8 swap its easier, v6 is a waste of time, ect, so if thats what your thinking please keep it too yourself. Im looking for any...

Just wondering if anyone knows if the body loom is the same between E1 Clubsport and a VE omega? We have a wrecked clubby and an Omega to transplant the drive train into. We have the dash loom removed and was wondering if we have to take the body loom too from the clubby? Cheers

So lads, this is my first thread, and I didn't want it to be, I've been looking for a relevant thread for months. Anyway, the level 2 dash in my VR Executive has had broken contact points for as long as I've had it. So obviously, no fuel or water temp without a solid whack on the dash. I'm over...

Howdy! I've got a '98 VT Commodore Sedan (Acclaim I think). A couple weeks ago, my car was broken into and my headunit, amps, sub and hilariously bootliner (as it was attatched to the sub via a strap) are gone. Anywho, I'm looking to put something in on a budget, and found a sub and an...

Hello All, Just finished installing some 6x9's in my VX 2002, much by trial and error. Thought I'd share with everyone and save people some time. There's no step by step that I could find on here that simplified things for us less savvy. 1. Remove back seat bottom part. (Pull two ties...

Hello everyone me again.. i am buying a vs manual ute in a week and a half, now looking through the photo's i have seen that it has a level 1 cluster and i don't like not being able to see what engine rpm my car will be doing,i am not heaps car smart but will definitely know when to shift, but...

When i installed my headunit or my sub, when i was running the power cable i ran it through the i think its the main firewall underneath the driver side and to get it through i had to drill, and i think i remember hitting the look because i took the drill off and it looked like there was plastic...

DESCRIPTION: Wanted to Buy ITEM: The loom / wiring that connects to the VE subs, Amplifier, Battery and rear doors, i'm sure some people here have upgraded their systems and no longer need their loom. LOCATION: NSW, Central West CONDITION: Used or New DELIVERY/PICK UP INFORMATION...

hi all, I hope i have posted this in the right section. I have fitted a VY firewall along with the complete dash including the heater box and LS1 engine to 1985 trans am. I am using the VY chassis wiring loom along with the fuse box, relay box, PIM, BCM and ECU. not using traction...

[IMG]http://forums.justcommodores.com.au/attachment.php?attachmentid=163289&d=1373467587 hey guys i am trying to connect my fog lights to the Holden SS pull out switch that i got of eBay because the fog lights are controlled by a simple on off switch,i got the wiring harness kit off eBay...

HELP I changed over my interior from the stock to a custom ss interior , as I removed the dash I thought I labelled mist of the wiring groups , so I put i t back together and now when I connect my battery my headlights go on and wont turn.off at all, also in addition my temp gauge instantly goes...

Hey guys, i have a level 3 cluster and i want all functions to work! i have the loom in the boot, along with a trip computer, can i pay someone to make it for me? Im in melbourne , i dont mind posting it and i can sort out a way of payment ( Paypal )

Hello I'm having trouble with the Loom in my VR executive the loom is a VR Calais I have the BCM and the auto ECU but i think i have done something wrong the headlights wont turn off (Even with the key out) the fuel and temp gage go to the top when the car isnt even started or anything no...

hey every one i am thinking of puting a vs dash into my vn and i am wondering if it is possible to keep the vn dash cluster and loom and slicing the vs plugs for the wiper indcaters and so on into the vn loom.

Hey people, wired up some of my lights over the last few days and thought some of you would be able to use this for installing things in your own car. Basically, this is how to make a wiring loom (lengths of wire wound up by tape) and then wire up an object with a switch. This How To is based on...