304 304 v8 vn manifold 4btb advice!

[Immortality]

The Crow stage 3 is really still a small/mild cam. They are really old grinds, not enough valve lift.

 

[wraith]

The Crow stage 3 is really still a small/mild cam. They are really old grinds, not enough valve lift.

Craig has a list some where with the manifold applications with the lift etc. will see if I can find it.
http://www.torque-power.com.au/tp_manifold_selection_guide_2010.pdf

 

[Immortality]

Fairly sure the crow stage 3 cam is 227°/220° @ .050" 113lsa .486/.486 lift (only) Listed as 2500-5500 rpm.

 

[Darren_L]

Fairly sure the crow stage 3 cam is 227°/220° @ .050" 113lsa .486/.486 lift (only) Listed as 2500-5500 rpm.

yep that's the specs
I've got the Crow stage 3 in my engine + flat top pistons. Might be an old skool grind, but it's actually a really good cam. I'm getting 275rwhp and it makes power across a very wide range and peaks at around 5800-5900 rpm. Has a really strong mid range

 

[Immortality]

yep that's the specs
I've got the Crow stage 3 in my engine + flat top pistons. Might be an old skool grind, but it's actually a really good cam. I'm getting 275rwhp and it makes power across a very wide range and peaks at around 5800-5900 rpm. Has a really strong mid range

What intake manifold are you using?

 

[Darren_L]

I'm using the Trickshift TTB
I've been very impressed with it, very expensive though

 

[Immortality]

It'll be interesting to see how that cam goes with the TP low dual plane manifold.