michaelw
Donating Member
- Joined
- May 4, 2005
- Messages
- 557
- Reaction score
- 10
- Points
- 0
- Age
- 48
- Location
- Newcastle NSW
- Members Ride
- VX S2
Hi all,
I mave made a number of serial MAX232 ALDL circuit boards for use in VR/VS/VT, they are my own design and work with V8's.
This is a pre-etched circuit board BUT to make you will need to,
1)prepare the board, clean off the tracks with turps then meths
2)drill the board (0.7mm drill bit)
3)buy the other components including the OBD2 plug
4)solder
note, I have made one small mistake with these boards so the MAX232 chip needs to be put on the solder side, rather than the component side.
Cost $10 (which includes postage)
Mike
I mave made a number of serial MAX232 ALDL circuit boards for use in VR/VS/VT, they are my own design and work with V8's.
This is a pre-etched circuit board BUT to make you will need to,
1)prepare the board, clean off the tracks with turps then meths
2)drill the board (0.7mm drill bit)
3)buy the other components including the OBD2 plug
4)solder
note, I have made one small mistake with these boards so the MAX232 chip needs to be put on the solder side, rather than the component side.
Cost $10 (which includes postage)
Mike