cbr1234mike
New Member
Im thinking of getting a cam package from you guys. Im considering installing it myself. Any tips? Do and Donts?
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Self install cam package into vs v6 ecotec?
- Thread starter cbr1234mike
- Start date
MACE
Well-Known Member
- Joined
- Mar 30, 2008
- Messages
- 3,187
- Reaction score
- 102
- Points
- 63
Hey cbr1234mike,
In regards to installing a cam I would get a hold of a workshop manual for your car, study it and take as much time you need when installing it avoid rushing the work. Rushing normally leads to costly mistake in the case especially during removal and installation of the cam, such as nicking a cam bearing with a cam lobe (not good!). Make sure you have a large, clean, organised workspace such that you easily know where everything else goes back.
I'm sure they may be others who may be able to offer additional specific advice, however what I've written above assuming you have a good mechanical aptitude and have had some experience with these engines before
BTW have replied to your emails
Cheers,
Steve
In regards to installing a cam I would get a hold of a workshop manual for your car, study it and take as much time you need when installing it avoid rushing the work. Rushing normally leads to costly mistake in the case especially during removal and installation of the cam, such as nicking a cam bearing with a cam lobe (not good!). Make sure you have a large, clean, organised workspace such that you easily know where everything else goes back.
I'm sure they may be others who may be able to offer additional specific advice, however what I've written above assuming you have a good mechanical aptitude and have had some experience with these engines before
BTW have replied to your emails
Cheers,
Steve
