Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
Vy clubsport calipers and rotor into vt2 Clubsport
- Thread starter philip83
- Start date
Tsunamix
Active Member
- Joined
- Nov 17, 2008
- Messages
- 666
- Reaction score
- 32
- Points
- 28
- Members Ride
- VT 2
I think - stress think - the VY clubsport used the corvette C5 Calipers, which are 330mm diameter. The stock rotor is 250mm.
I did this using PBR2 versions of the caliper and DBA t4 vented rotors. Very good upgrade.
However it's absolutley critical you mount the correct caliper onthe correct side. They are marked, and if you get it wrong you will have to machine your rotors every 3-6 months because of caliper flex which feels like rotor warp.
I did this using PBR2 versions of the caliper and DBA t4 vented rotors. Very good upgrade.
However it's absolutley critical you mount the correct caliper onthe correct side. They are marked, and if you get it wrong you will have to machine your rotors every 3-6 months because of caliper flex which feels like rotor warp.