leavz
Member
- Joined
- Aug 17, 2014
- Messages
- 113
- Reaction score
- 25
- Points
- 18
- Age
- 30
- Location
- Geraldton
- Members Ride
- Vr Commodore
Hey guys! Back at it again with another respray.
so it's been a little over two years since i resprayed my ute link below
https://forums.justcommodores.com.au/threads/vr-ute-full-respray.237434/#post2723079
So two years has gone, i've learnt a ton more, became qualified in my spray painting apprenticeship, had my car keyed and my sisters boyfriend reverse into the rear quarter.
so i've decided to bring it back to its former glory and make it something to be proud of,
whole car is getting primed apart from the inside edges, the paint was perfect so i'll only be priming the outside panels.
car will be getting done in Clear over base this time instead of direct gloss, I won't be removing the plastics on the middle puller between both doors because they have a hard plastic cover thats brittle and i dont have time to order/replace a part that i dont know the price of, so they're staying but if it bothers me that much in the future i'll remove and repaint the inside edges, but i highly doubt that day will come.
Products;
Autothane HS primer
PPG deltron base coat
Standox Standard clear
Spray guns;
Iwatta W400 Belaria 1.4m tip base/clear
Iwatta A2Z 1.8m tip primer gun
Yep thats right, i'm mixing products but through out my time using over 5 different paint systems i've picked the best clear i've used at this point in time, yes i'm sure there is clears that would stomp all over the clear i'm using but this is what i had available and i've been using it for over a year, also ppg base is because i got it all for free so can't complain.
Anyway enough talk lets get into it!
so it's been a little over two years since i resprayed my ute link below
https://forums.justcommodores.com.au/threads/vr-ute-full-respray.237434/#post2723079
So two years has gone, i've learnt a ton more, became qualified in my spray painting apprenticeship, had my car keyed and my sisters boyfriend reverse into the rear quarter.
so i've decided to bring it back to its former glory and make it something to be proud of,
whole car is getting primed apart from the inside edges, the paint was perfect so i'll only be priming the outside panels.
car will be getting done in Clear over base this time instead of direct gloss, I won't be removing the plastics on the middle puller between both doors because they have a hard plastic cover thats brittle and i dont have time to order/replace a part that i dont know the price of, so they're staying but if it bothers me that much in the future i'll remove and repaint the inside edges, but i highly doubt that day will come.
Products;
Autothane HS primer
PPG deltron base coat
Standox Standard clear
Spray guns;
Iwatta W400 Belaria 1.4m tip base/clear
Iwatta A2Z 1.8m tip primer gun
Yep thats right, i'm mixing products but through out my time using over 5 different paint systems i've picked the best clear i've used at this point in time, yes i'm sure there is clears that would stomp all over the clear i'm using but this is what i had available and i've been using it for over a year, also ppg base is because i got it all for free so can't complain.
Anyway enough talk lets get into it!
Last edited: