Mickyinks
Member
- Joined
- Feb 26, 2021
- Messages
- 27
- Reaction score
- 34
- Points
- 13
- Age
- 56
- Location
- Melbourne
- Members Ride
- Ve hsv senator
I couldnt access account so had to open a new one
My build is an e1 Ve hsv senator with a lsx 454 solid roller N/A i hd the engine built and started it in november 2019, 458rwkw the builder put a cam in and didnt have enough spring pressure so pulled it out in april 2020, rebuilt lifters , new cam, started it back up mid august last yr ran it up on dyno 488rwkw. Mid december put a flex fuel sensor on it and ran it up on E85 502rwkw... Been running great and now very happy
Lsx block bored and honed 4.190 bore 4.125 stroke , rotating assembly balanced with ati balancer and light flywheel, king coated bearings
Je Fsr pistons, compression 12.3 :1
trickflow MMS 260 ls7 heads 2.200 hollow intake, 1.615 solid ex , pac 1209x springs with titanium retainers
ARP head studs for six bolt heads, ARP bolts thruout
YT MMS solid roller rockers, edelbrock high rise valve covers
Crower solid lifters
Cam motion low lash Solid roller cam 255/269 114.5+4.5 specced it myself
double row timing set +6
cometic MLX head gaskets
MMS ls7 MSD airforce intake manifold, msd fuel rails, 1000cc injectors
TPIS 102mm throttle body
Harrop otr cai
melling standard volume high pressure pump
evans water pump , 160thermostat
MSD starter
catch can
hurrican 1 7/8 cermaic coated extractors
3inch no cats ceramic coated cat back
new power steer cooler
new engine oil thermostat
new front and rear rotors and pads
new rear speed sensors and speed sensor harness new rear wheel bearings
new plugs and leads new concentric slave cylinder,
new headlights
new front bumper, bonnet, front guards, fresh paint
new windscreen sill
all engine bay harnesses re-wrapped
brake lines flushed , new brake fluid
new flat underbody panels, front and rear diffuser
new fire wall heat sheild
new window trim all round
adjustable control arms with nolathane bushes
MCA red coil over shocks
harrop tru track diff, 3.45 , vf upgraded axles
fore innovations twin intank 285lph pumps
t56 gearbox , mantic twin ceramic clutch , light flywheel
flex fuel sensor
next for mods is a cage, new front seats, totally new upholstery inside, then its complete
My build is an e1 Ve hsv senator with a lsx 454 solid roller N/A i hd the engine built and started it in november 2019, 458rwkw the builder put a cam in and didnt have enough spring pressure so pulled it out in april 2020, rebuilt lifters , new cam, started it back up mid august last yr ran it up on dyno 488rwkw. Mid december put a flex fuel sensor on it and ran it up on E85 502rwkw... Been running great and now very happy
Lsx block bored and honed 4.190 bore 4.125 stroke , rotating assembly balanced with ati balancer and light flywheel, king coated bearings
Je Fsr pistons, compression 12.3 :1
trickflow MMS 260 ls7 heads 2.200 hollow intake, 1.615 solid ex , pac 1209x springs with titanium retainers
ARP head studs for six bolt heads, ARP bolts thruout
YT MMS solid roller rockers, edelbrock high rise valve covers
Crower solid lifters
Cam motion low lash Solid roller cam 255/269 114.5+4.5 specced it myself
double row timing set +6
cometic MLX head gaskets
MMS ls7 MSD airforce intake manifold, msd fuel rails, 1000cc injectors
TPIS 102mm throttle body
Harrop otr cai
melling standard volume high pressure pump
evans water pump , 160thermostat
MSD starter
catch can
hurrican 1 7/8 cermaic coated extractors
3inch no cats ceramic coated cat back
new power steer cooler
new engine oil thermostat
new front and rear rotors and pads
new rear speed sensors and speed sensor harness new rear wheel bearings
new plugs and leads new concentric slave cylinder,
new headlights
new front bumper, bonnet, front guards, fresh paint
new windscreen sill
all engine bay harnesses re-wrapped
brake lines flushed , new brake fluid
new flat underbody panels, front and rear diffuser
new fire wall heat sheild
new window trim all round
adjustable control arms with nolathane bushes
MCA red coil over shocks
harrop tru track diff, 3.45 , vf upgraded axles
fore innovations twin intank 285lph pumps
t56 gearbox , mantic twin ceramic clutch , light flywheel
flex fuel sensor
next for mods is a cage, new front seats, totally new upholstery inside, then its complete
Last edited: