Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Recent content by Copls1

  1. C

    Vs l67 knocking after CAS replaced

    Re put harmonic balancer on and now starts but still knocking this has all started from putting new crank angle sensor
  2. C

    Vs l67 knocking after CAS replaced

    Yeah everything is perfect, now when I put harmonic balancer on for the 26th time the car won’t start, not codes either
  3. C

    Vs l67 knocking after CAS replaced

    I’ve taken the belts off knock is still there
  4. C

    Vs l67 knocking after CAS replaced

    I have a vs wagon with a l67 in it was running a little rough and CAS crank angle sensor was coming up so replaced it and put harmonic balance back on but now motor is knocking loud and idea why this would be happening and how to fix it ? Thanks in advance
  5. C

    Wh l67 standard bottom end bearings size ?

    In the process of purchasing new bottom end bearings but wouldn’t have a clue what size I’m to buy motor is Standard L67 out of a wh statesman If anyone could help would be appreciated thanks in advance
  6. C

    Vx calais v6 won’t start after removing gas system

    It was aftermarket gas system just need to know how to bridge the wiring so I have power to injectors
  7. C

    Vx motor rattle after 10mins and burning smell

    Fixed thanks for your help was air system needed bleeding
  8. C

    Vx calais v6 won’t start after removing gas system

    Hi I’ve removed a gas system and all wiring in my vx v6 Ecotec and now the car won’t start it turns over but doesn’t fire and I get these error codes EEPROM checksum error 24 PCM fault logged error 19 No serial data from ABS error 8 any help would be appreciated, I’ve re link bcm to ecu...
  9. C

    Vx motor rattle after 10mins and burning smell

    Oil filter ect changed about 4000 ks ago
  10. C

    Vx motor rattle after 10mins and burning smell

    Oil level is fine grave of has nothing to do with it been using the same stuff for years, and if you read my post oil is full and so is water,
  11. C

    Vx motor rattle after 10mins and burning smell

    Sound like bottom end, but like I said only does it after about 10min of driving I just have the abs light come up and the traction light on dash no engine light
  12. C

    Vx motor rattle after 10mins and burning smell

    Just a stock Ecotec v6 I’m getting engine code ABS/ETC fault and Bcm fault lodged
  13. C

    Vx motor rattle after 10mins and burning smell

    Hi I have a 2001 vx s pac yesterday. I noticed after about 10mins of driving it was rattling from the motor on acceleration when I got home I could smell a burning smell and the thermos were on, oil is full water is full any ideas ? It runs perfect for the first 10mins then starts to rattle and...
  14. C

    Vy Calais l67 engine in a VS wagon

    Hi I know it may have been asked before but I’m new to this what’s involved in putting a vy l67 motor into a VS commodore, I have everything vy l67 loom ecu, bcm ect, it’s it literally just plug abs play, any help would be appreciated. Also my nephew has a vx l67 his wanting to put in his vy is...
  15. C

    Vl rear beaver panel

    All good found one at a wreckers, also rare spares don’t make them
See more
Top