stoney1only2001
New Member
- Joined
- Apr 12, 2017
- Messages
- 11
- Reaction score
- 1
- Points
- 3
- Age
- 23
- Location
- NSW
- Members Ride
- Holden VU S pack 2002
Hey there, ive been reading around and can’t find specific instructions on what to do to fit an L67 into my 2002 v6 VU ute with a getrag 5 speed box, I have seen the thread: http://mace.kayako.com/Knowledgebase/Article/View/307/744/fitting-vs-vy-l67-into-vuvx-commodore
but I am unsure what it means by ‘Mirror balance flywheel to flexplate’ and ‘Get the crankshaft drilled for flywheel dowels to fit flywheel’
I understand the electrical work that needs to be done but just don’t understand the flywheel and crank situation, do I need to pull the crank out to drill it?, measurements? etc.
Also is my 2002 V6 vu mkII manual memcal/ecu/pcm compatible with the L67 or
re-tunable to suit the L67 and a 10 psi pulley kit with the manual box still in my ute, Thankyou in advance for any help!
but I am unsure what it means by ‘Mirror balance flywheel to flexplate’ and ‘Get the crankshaft drilled for flywheel dowels to fit flywheel’
I understand the electrical work that needs to be done but just don’t understand the flywheel and crank situation, do I need to pull the crank out to drill it?, measurements? etc.
Also is my 2002 V6 vu mkII manual memcal/ecu/pcm compatible with the L67 or
re-tunable to suit the L67 and a 10 psi pulley kit with the manual box still in my ute, Thankyou in advance for any help!