HI, my 2013 sv6 ve is misfiring in the 4th cylinder. Only at idle, under load even the slightest amount it runs smoothly, I've swapped over sparks, and coils and attempted at an injector clean, any thoughts on what could be causing the issue? Wondering if low compression could cause idle...
okay everyone, first post.
ive had this idea for awhile but I genuinely can't find any proper info on in, I currently own a rattletec vz and Im looking at swapping the motor and don't wanna go the ls route as its too common for my liking, however I have an old r31 that has everything I need to...
Hey all
I’m putting together a VH tail shaft but i have a spacer? Washer? Left over.
All I can find is a VB diagram but it’s doesn’t show anything about it.
Some kits online come with a new one, some don’t.
Does anyone know where it goes?
Cheers
I’m currently looking at getting a set of brake shims as I have noticed that after taking the old ones out that I hear a clunk as the brake pad slides so I was wondering if anyone knows where to buy a set for all four wheels. Because the only thing I can find is a set in ebay for $60 which I...
Hey Guys!
I just got my first car it is a 1998 VT commodore executive and the body isn’t perfect it needs some touch up paint which is no biggie however something that is really getting to me is the front and rear bumpers have massive bumper gap and I am writing this post to ask for help on as...
Hi all, im looking for some help, i have a 09 ve sv6 ute. It has had a million problems since i brought it, car was owned by a mechanic before me, and appeared to be well looked after. I have also looked after the car. Car gets babied most days these days.
Car has had power steering pump changed...
Hello, I’ve recently had some issues with my 2008 Sv6 Commodore Ute, hoping someone could point me in the right direction :)
1)My car has had some bad throttle response, I’d put the foot down. And it wouldn’t want to give me any throttle, then give it to me all at once. I took out the MAF...
Hi, i’ve bought a genuine reversing camera too replace my old non functional one, for my 2013 VE commodore sedan. Wondering if anyone has any knowledge on how or if you could direct me to a guide.
Hey guys. I’ve never seen this in all my cars I’ve been through. What causes this too happen? Early warning signs for something about too go belly up? (It’s like when u put your finger on one end of the straw n sucking till your eye ball pops outta its socket)
Ohh yeah. Radiator isn’t empty or...
I've just removed the lpg system and all of the components to the lpg system that are in the engine bay. Just wondering if I can get any hose or if its special type of hose that I'll need I'll attach a photo of where I need the hose for.
Hi all, I have a vy calais and recently my passenger side mirror started playing up. When I press one of my presets on my seat, the side mirror won't go into the right position and will just tilt all the way up (facing the sky) or even when I go into reverse the mirror won't tilt to to the lower...
I'm in the process of removing the lpg system on my vy ute I've removed everything besides what's in the engine bay. (There's no lpg in the system tank has been removed) Just wondering if anyone knows if there is anything else I'll need besides new heater hose's and airbox? Any tips and trips...
07/2008 VE SV6 with HSVi DEB code (stripes) and colour code is the gorgeous 687F Sting Red.
VE8EK69
So far I can tell that the VE is regarding the model (obviously) and the 8 is the year of manufacture, I need some help decoding the EK69
I have seen so far on these forums that the VE8EK69 is...
Hey,
I have these Holden original spark plugs, I can't find the "gap" amount on them and Im not sure what "gap" I need for my engine. The part no is 92141894 and is attached below. Are these ok for my car?
Hey guys, I just made this account now to talk about this and hopefully get some answers but last night when I was driving on the highway at 100km an hour my car decided to shut itself off. My headlights now no longer work and my car keeps bringing up all sorts of codes related to air bag faults...
Hi all,
My One tonner won't start unless you disconnect the battery just before you start it any info on what it could be greatly appreciated as I just brought the ute and had no idea it would do this.
Kind Regards,
John.
Just wondering what i would need to do in order to change bushes on the k frame. Need to change them to pass roadworthy as i just got the car and need to register it.
Hey guys, I know this is a stupid question but I just bought a VX and wanted to know how to put the Calias boot garnish on. And where to buy it. Do I need a new boot? Does it just screw on?
My grandfather’s car who left it to my father when he passed and I would like to it to continue down the family but it’s broke as of now. Plugged in a scanner and got a few codes. Any information, links, advice, suggestions, guides etc. would be appreciated.
2004 Holden commodore Acclaim
codes...
Hey guys,
Have a turbo 350 behind a 355 in a vh. Between first to second shift it has started slipping just in between the 1st to 2nd gear change out of no where, doesn’t slip in the gears themselves, as in can do pulls in each gear fine and shifts into top gear normal. Box is manualised, meant...
Hi guys just wondering if there’s anywhere I can get this hood ornament I don’t really wanna spend 700 on it cause that’s just ridiculous so wondering if there’s any aftermarket ones I could get or any suggestions of custom ones cheers.
Hi,
Looking at upgrading my cars rims to something decent. I have a 2015 Series 1 VF SS Sedan. Currently sitting in some cheap as/nasty/no name/off-the-shelf 18”s, but with a top of the range tyre
Wondering if there’s any recommendations on what to get and where? Also, what to avoid, what’s...
Just looking for a tip on diff upgrade options and price ranges for an Automatic Series 1 2015 VF SS Commodore Sedan
I’ve already done brakes, interior/sound system/security upgrades, basic engine and exhaust with tune, etc. I’m going to start saving up for the one BIG go at the engine, but...
Just put a new motor in my vs after the last one had rod knock, new motor was fine before hand all I did was gaskets and quick look at lifters, was running ok when put in and now that I've put majority of it back together this noise has started, cheers for the help...
Hey all, im in need of an oil sump replacement on my series II ecotec vy,
Will a vx oil sump fit okay? i’ve been told the vy has a slightly larger/longer oil sump!?
Ok guys so I need a little info on vx clusters so I own a vx calais ls1 and I’m sick of the stock background of it and wanting to change it to a blue background eg from a hsv the issue is they go out to 250kmh and mine only goes to 220kmh can I simply get it programmed or do I need to buy a...
Hi all,
I'm absolutely stumped And can't figure it out for the life of me.
I have have a Jan build 2001 vx ss Auto and recently have rebuilt The gearbox. Upon the vehicle being returned I noticed that I don't seem to have any reverse lights.
I've checked the bulbs they seem fine, I've checked...
Hi everyone,
I own a 2009 VE SV6 ute.
It is Manuel, and the shift knob is starting to show its age. Ive already replaced the wheel and have been wanting to do the shifter. The only thing is the reverse in my car is top left, thats right, next to 1st (the problem).
I cant find a replacement...
Hi guys, new here and the car world.
Wanting to know if you can change the gear knob on a VY Commodore Automatic and is it worth it?
I've noticed it has a screw at the front of the gear knob (facing the front of the car) but I've been told it's not worth it unless it's faulty, and then I've...
Hey Guys,
I've been trying to learn as much as I can about project cars, at a beginners level, as a long-term hobby and project as it's something I've always wanted to and really respected people who do it. My family just wasn't into cars. I do, by chance happen to have access to a mechanics...
hey guys just bought a ducktail spoiler from mrbodykits and my 2002 vx commodore hasn't ever had a spoiler its pretty much untouched in every way so do i literally just measure out where the spoiler sits and drill out the boot? but then i have the problem of i have 2 bolts 2 washers and 2 screws...
I’ve got a 1982 Wb ute that I’ve just started as a project. It’s got a 202 in it, was originally a 3 on tree but was converted to a 4 on floor.
Got a problem with the clutch, however. It’s stuck to the floor. Car goes in to gear fine when the car is off but when the car is on it doesn’t go in...
Hey guys, have recently gotten a full ss kit for my calais and was wondering the best way to go about fitting it properly? I've had a quick look underneath and can't seem to find any marks for the screws? Could it be an aftermarket bar or something? Cheers
Hi,
just backing up a question I asked a few days ago. For those that have installed their own oil catch can how hard is it (I’m a novice)?
Also what’s a decent, durable, but not breaking the bank type of brand and kit could you suggest? For a 2015 VF SS n
thanks
I’ve been hearing a bit of conflicting advice regarding this bit of kit (in new to the world of mods), but I’ve seen a few people come across blown seals and such though mainly in much high output cars than myself (2015 VF SS).
Just hoping for some advice on their relevance for a stock build...
hey all, just looking for Abit of help, recently swapped an l67 from a vz calais into a vy exec and I have this pop up through every system check, I have no clue on what it is,
also my dimister does not shut off (lights always on) and my ac does not turn on at all(no light at all) and when I do...
not sure if this is where I post this... sorry if not.
fairly new here.
done a l67 swap into a vy exec, and now have a rear lamp fuse fail pop up everytime I turn car on, checked the fuses under the dash but they seem fine, does anyone know where this fuse is located? or how to fix?
Yo so I have a 2009 sv6 ve commodore and this morning I drove to work and as I turned off my car I got out and there was a lot of antifreeze leaking from under the car right under the drivers side near the wheel after a while of leaving the car off it stops leaking and it also doesn’t leak when...