wheels

Hey guys, I’ve got a vt berlina, and I wanna know, regardless of legality, best fitment options for a relatively comfortable ride with kings SL’s (don’t mind some stiffness). Wheel and tyre size wise. In other words, how wide can I go comfortably? And what wheel diameter size is best, looks...

What wheels are these please??

Hi there, new to the commodore game so just got a question. Has anyone fit 16x8.5 +5 wheels to a solid axle vs sedan? If not is there a better width/offset combo i should go with Willing to do just about anything to get them to fit like rolling/pulling guards, car is going to be thrashed anyway...

Anybody know where else I could find these: https://www.ebay.com.au/itm/143495100684 I'm really not willing to pay almost $240 for 4 centre caps, don't need them to be genuine either or even new for that matter, just after the Series 2 design in silver. Also, although I'm 99% sure, does anyone...

Sorry if this is a dumb question…. just got an LS1 wh statesman, and I’m assuming regular pre ve wheels (such as off Vx ect) would fit? But just wanting to double check

Hey folks, Interested on buying 20" Walkies for my VY S2 wagon. Was wondering if they're legal. Bonus points if they fit on SL all around springs? Guessing I'll have to roll the guards too. Cheers

Hey guys I’ve decided to finally throw some new wheels on my e3 clubby and I want to make it have a wider wheel looking at getting 20x10 on the front and 20x11 on the rear, I’m going to get my guards rolled and all that but I just want to know if anyone has these size wheels and knows what size...

Thinking of buying these as a quick replacement for my 2008 SV6 as I plan to get the stock ones painted, will these fit fine?

Hi, Looking at upgrading my cars rims to something decent. I have a 2015 Series 1 VF SS Sedan. Currently sitting in some cheap as/nasty/no name/off-the-shelf 18”s, but with a top of the range tyre Wondering if there’s any recommendations on what to get and where? Also, what to avoid, what’s...

How are you going boys, I just wanted to know if I bought 20x9” rims for my go wagon, how would they fit and if there is anything needed to be done to make them fit

Will 15 x 7 Inch Street Pro II Wheel Machined To Suit Holden Commodore Pattern with a 3.5' backspace fit my vk calais that is lowered 2.5'????

Hi just wanting to get some information on this topic. so I’m about to buy vertini dynasty 20” wheels with 8.5 fronts and 10” rears, I just needed to know if anyone can give me some info on if they would be legal. I have a stock ride hight and am just looking to get a bit better look than stock...

Hi all. First time posting here. I brought my first ever commodore two weeks before we went into stage 1 lockdown in Vic lol! A stock 2014 VF SS. I have been able to drive around during lockdown because, of work which is great! So I've gone through the forums looking for this info. But I just...

Hey guys, I'm in need of a little assistance on finding these exact rim design, I can tell from the look of them that it tried matching the design of the VE GTS rims but its a bit different and that's what I like about them. Any ideas where to find them in Melbourne?

Hi Guys, was just wondering to know if anyone else has put on a set of VF SSV Redline Series 2 19 inch rims on a VZ Commodore/calais before? I know what I have to do in order to make them fit but just EOI if anyone else has done it? Cheers

Hi all, is there a way to find out what wheels came on the car from factory, not the size but the type, did all of each model come with specific mags or were they optioned? We have a vn s and trying to find out the exact mags that it came with, it currently has vl calais wheels. I know that...

Hey guys quick question, I just got Ve wheels for my car and I understand I need the centre hub machined to fit my vz. I’m just wondering if anybody knew any places around the south east Melbourne area that does it and rough cost on prices? Or if any of you guys have any good tips for doing it...

Hi, I recently bought an ssv and am wanting to get new wheels. Currently sitting on 20's but want to go 18s. Anyone else running 18's? And what width and offset would fill the guards best? I'm thinking something like 18x10 +40 offset should fit but anyone know for sure? Also, the car is lowered...

Hey guys I'm after some advice or knowledge if anyone has done it before. Is it possible to put a 245/45/19 tyre on the standard 19" 8.5" with factory offset of +48 with out it hitting on the strut or inside of the wheel well? The total circumference changes by 77mm and the side wall height...

So i know this topic has a few threads already, but i couldn't seem to find anything regarding white vz calais? the attached photo is a white vz with the stock rims, what rims would best suit (Looking for larger rims otherwise i would of restored the stock ones), would 19" ssv look nice? Photos...

Hey guys, I just picked up a set of Calais international rims for ridiculously cheap, and being cheap they’re a bit how ya going. They’re covered in road grime and brake dust on the back side and the fronts are filth. Was wondering what I should use to clean them semi easily as i don’t want to...

Hey guys, I was looking at buying a new set of wheels for my VF S1. However I noticed that the centre bore for the aftermarket wheel is 69.6 and has an offset of +42. I'm pretty sure I can remember that the centre bore on a vf is 66.9? Will these rims still fit even with hub centric rings, or...

Hi all as the title says is there a LEGAL way to add wheel spaces? I have some 6-4 pot brembo’s to fit on my 15 SSV but unfortunately the standard wheels touch the back of the spokes to the face of the caliper. I have picked a new set of wheels that I want but if there is any legal way to...

Hi there, Fresh on the forums, been out of the car scene for a while. This might seem like a ridiculous question. So im looking at purchasing a set of stock interceptor wheels with tyres, ive noticed a lot of VT-VZ wheels, will I have any offset issues fitting later model wheels of this era...

Hi, I am restoring my alloy rims back to original (Without Painting) and wondering if anyone can suggest a technique to make rim look original after sanding fine scratches. I am looking for the satin alloy colour.

I’m taking my car in tomorrow to have the roadworthy signed off but one thing they told me I had to do was get one new front tyre. The easiest way for me to go about this is to switch both my front wheels out for a set I’ve got here off a different VX, but they’re stock rims and I currently have...

Hey there, New member and first time poster so hopefully I've done this correctly... I was looking at purchasing some wheels for my partners first car and I came across a set of 4 plus a matching spare for sale that were listed as "Genuine Holden Wheels" ... Supposedly they were " Factory...

Hi all looking at getting some vossen VWS-2 wheels. So what’s everyone’s thoughts? The wheels are going to be 20x9 front (no dish bottom picture) And the rears are going to be 20x10 (deep dish top picture) I know this is going to be subjective because some people like deep dish wheels and...

hi all, I am looking at getting some wheels for my SSV Wagon. I have some 4pot brembos front and back off a series two that I am going to put on and I really don't want a 35series profile tyre so I was thinking of getting some 19 inch wheels instead of 20s. Either something in the Koya range...

I GOT NEW WHEELS. For all those wondering about the D Hole steels wheels from Tarzia Tyre Centre. Series 2 VT with coilovers. Was deciding between the BCI black interceptor stock look and the D Hole drift look. Both have their pros and cons. BCI interceptors come in 7”, 8” and 9” width and...

Hi there, i've been driving around with crappy ssw 19'' 8.5 wheels on my vu ute s for a couple months now and i'm looking for an upgrade, i've been looking into satin black simmons fr19 wheels on ebay (new) 19'' with 8.5 front and 9.5 back. I'm unsure if they will fit. what tires and offset...

Hey guys I've just been given a set of lenso d1's 18 inch from my brother I'm wanting to put them on my Ute but don't know how low I can go without them scrubbing my guards they are 235/40. I'm ok with guards being pumped/rolled and will Get spacers if needed. Any help would be great cheers.

Will BMW X5 wheels fit straight onto my vz wagon with low profile tyres on them or will there be issues with hub size becuase I know the stud pattern is the same

hey guys I was wondering if anyone has tryed something simular to whats pictured with the stock 14s that come on the executive ?

Hey guys, sorry if this has been brought up b4, but I can't find it in the records. I've got a VN Calais which in about a week is getting dropped with king super lows and Monroe gt's. I'm also online shopping for wheels to suit the freshly dropped Calais. Question is: the mags I'm looking at are...

Hi guys, I've got a set of 16 x 7 HDT Momo Star wheels on an old VK sitting in the shed and I'm just wondering what they might be worth. The rims could do with a bit of a tidy up but they're in otherwise good condition. Any suggestions? Cheers

Hey guys I'm seriously on the verge of either selling my piece of sh**t Vx ss or putting a brick through it... The **** box recently developed a wierd clicking/clunking sound from rear right wheel which is annoying coz it goes and comes when it feels like it. I've replaced diffs and I've...

Gday everyone, Just got my new 2014 VF Ute (White). Image attached. Pretty happy with it all but was thinking about changing the wheels, to something black. Currently fitted with Series 2 VE set which are in great condition. I was looking into the whole powder coat option (as it is...

IITEM DESCRIPTION: Looking for one (1) HSV VY GTS 19" wheel in shadow chrome. LOCATION: I'm in SA, Adelaide metro. CONDITION: Will consider any original condition so long as its genuine and structurally sound (no cracks). DELIVERY/PICK UP INFORMATION: Pick up, can pay for postage...