Fu Manchu
We’ll get together. Have a few laughs.
- Joined
- Mar 18, 2006
- Messages
- 18,479
- Reaction score
- 23,606
- Points
- 113
- Location
- WA.
- Members Ride
- VZ Crewman, VZ Cross 8, & ya mum.
The tub pics as promised.
Replace the torx bolts holding the top trims with high tensile longer ones. I used these tiedown eyelets from hardware shop.
I have also considered adding them to the points where it bolts in and cutting slots in the tub liner, but I’m not as keen to have holes in the liner like that.
Going to add load rails in instead like @Jolls did.
On the hard lid (which you are getting)
The eyelet in the left corner. All four corners have them. Also have the nutserts and M5 cap head bolts instead of the manky screws on the stainless brace for the lid .
The corner near the tail gate showing the lock catch for the lid.
Replace the torx bolts holding the top trims with high tensile longer ones. I used these tiedown eyelets from hardware shop.
I have also considered adding them to the points where it bolts in and cutting slots in the tub liner, but I’m not as keen to have holes in the liner like that.
Going to add load rails in instead like @Jolls did.
On the hard lid (which you are getting)
The eyelet in the left corner. All four corners have them. Also have the nutserts and M5 cap head bolts instead of the manky screws on the stainless brace for the lid .
The corner near the tail gate showing the lock catch for the lid.