[VE] VZ and VE Alloytec PCV Problem/Fix

[VS_Pete]

How come the first pic has 2 holes & the 2nd pic has one hole in it?
Looks like a different pcv?

This ok Lex?
If you turned the left one around (1 hole) it would have the 2 holes

 

[Lex]

This ok Lex?
If you turned the left one around (1 hole) it would have the 2 holes

Of course its ok!
I've had another sleep.

 

[stick3]

here is the latest plastic pcv orifice has the bigger ends from 2014 alloytec to fit all models from vz https://www.extramileautoparts.com.au/pat-pcv-valve-for-holden-calais-ve-vf-vz-3.6l-v6-l

 

[shane_3800]

here is the latest plastic pcv orifice has the bigger ends from 2014 alloytec to fit all models from vz https://www.extramileautoparts.com.au/pat-pcv-valve-for-holden-calais-ve-vf-vz-3.6l-v6-l

So where's the pic of the holes?

 

[stick3]

the yanks have known about this problem and the fix longer than us and in the youtube comments that pcv valve i posted is what they recommend from 2014 alloytec

 

[shane_3800]

I've tried doing it the "right way" and just drilling random bigger holes.

Both ways have worked for me?

 

[stick3]

So where's the pic of the holes?

i just poster the pic of the pcv whats in the 2014 allotecs

I've tried doing it the "right way" and just drilling random bigger holes.

Both ways have worked for me?

i did the mod few years ago 2 and 3 mm holes its all on here car run very smoothly and now you can buy the later pcv and no need to do the mod

 

[stick3]

part number 3 air inlet pcv valve look the same as as the plastic outlet fitted to the latest v6s

 

[DavesSV6Tonner]

here is the latest plastic pcv orifice has the bigger ends from 2014 alloytec to fit all models from vz https://www.extramileautoparts.com.au/pat-pcv-valve-for-holden-calais-ve-vf-vz-3.6l-v6-l

F**K that plastic POS. I'll stick with the genuine GM metal one in my VZ.

 

[DavesSV6Tonner]

the yanks have known about this problem and the fix longer than us and in the youtube comments that pcv valve i posted is what they recommend from 2014 alloytec

OMG watching concrete cure is more exciting than this bloke.